Date   

Re: CWOP

Lynn Deffenbaugh
 

CWOP servers do not support a filtered feed.  In fact, it's not even recommended to connect to the CWOP servers for any sort of feed. They're primarily (I've been told) for input of weather data and delivery to the NWS.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32




On 7/14/2014 9:30 AM, Burt Sammis kango03@... [aprsisce] wrote:
Here we go again.
In the configure/ports/new port menu for configuring CWOP it calls for a port setting
of 10152 which gives a full world wide feed.  WOW, too much info.  Do not care for all the Wx stations in the world.
Where can I find a port setting for NW Louisiana and NE Texas?
Burt
AF5AA  


Re: Save settings

Fred Hillhouse
 

Hi Burt,

 

The recommended use of APRSIS32 and a great deal of other amateur radio software is to run the software outside of the Windows protected areas, such as Program Files.

 

For example, one might set up: C:/HamRadio/APRSIS32.

 

I don’t believe I have notice any difference between the X and EXIT. I will have to test that now.

 

Best regards,

Fred N7FMH

 

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: Monday, July 14, 2014 9:20 AM
To: aprsisce@...
Subject: RE: [aprsisce] Save settings

 

 

Robert:
I am running APRSIS32 on Windows 7 on a desktop PC.
Running from Program Files.
Any changes made were not saved.
Making changes from the drop down menues.
David advised to exit from the EXIT button which I did and everything was saved.
Problem solved.  Sure saves a lot of key strokes.
 
Thanks so much for your interest and questions. 
 Burt
AF5AA


To: aprsisce@...
From: aprsisce@...
Date: Mon, 14 Jul 2014 05:59:52 -0700
Subject: Re: [aprsisce] Save settings

 

Are you talking about the PC version (APRSIS32) or the CE (APRSISce) version?

Better question, what device / operating system are you working with?

 

If this is a brand new install - Are you running it from "inside the zip file?"

  You must extract it to a directory where it can access the computer resources.

 

All the settings are kept in the XML file.

I can think of 2 main reason the application would not save the settings:

1. XML file is in a location that the operating system will not allow editing

2. The application (APRSISce or APRSIS32) is running, and you are editing the XML file.

   In this case, the application overwrites the XML file on exit, with data it has in memory.

   You must close the XML before making any "manual changes".

 

If you could describe your situation better, it would benefit our efforts to help:

1. What OS are you running?

2. Where are you running the application from?

   Ex: thumb drive, 'Program Files', Program Files (x86)', . . .

3. What changes are being made that are not being saved?

4. How are you making the change - Menu system or manual edit of XML file?

 

Robert Giuliano
KB8RCO

 

---------------------------------------------

 

From: "Burt Sammis kango03@... [aprsisce]" <aprsisce@...>
To: "aprsisce@..." <aprsisce@...>
Sent: Monday, July 14, 2014 8:23 AM
Subject: [aprsisce] Save settings

 

 

I have to reenter my settings each time I bring aprsisce.  I do not see any place to save the settings.
I am sure there is a place.  Please steer me to the place.
 
Burt
AF5AA 

 

 


CWOP

Burt N Sammis
 

Here we go again.
In the configure/ports/new port menu for configuring CWOP it calls for a port setting
of 10152 which gives a full world wide feed.  WOW, too much info.  Do not care for all the Wx stations in the world.
Where can I find a port setting for NW Louisiana and NE Texas?
Burt
AF5AA  


Re: Save settings

Burt N Sammis
 

Robert:
I am running APRSIS32 on Windows 7 on a desktop PC.
Running from Program Files.
Any changes made were not saved.
Making changes from the drop down menues.
David advised to exit from the EXIT button which I did and everything was saved.
Problem solved.  Sure saves a lot of key strokes.
 
Thanks so much for your interest and questions. 
 Burt
AF5AA

To: aprsisce@...
From: aprsisce@...
Date: Mon, 14 Jul 2014 05:59:52 -0700
Subject: Re: [aprsisce] Save settings

 
Are you talking about the PC version (APRSIS32) or the CE (APRSISce) version?
Better question, what device / operating system are you working with?
 
If this is a brand new install - Are you running it from "inside the zip file?"
  You must extract it to a directory where it can access the computer resources.
 
All the settings are kept in the XML file.
I can think of 2 main reason the application would not save the settings:
1. XML file is in a location that the operating system will not allow editing
2. The application (APRSISce or APRSIS32) is running, and you are editing the XML file.
   In this case, the application overwrites the XML file on exit, with data it has in memory.
   You must close the XML before making any "manual changes".
 
If you could describe your situation better, it would benefit our efforts to help:
1. What OS are you running?
2. Where are you running the application from?
   Ex: thumb drive, 'Program Files', Program Files (x86)', . . .
3. What changes are being made that are not being saved?
4. How are you making the change - Menu system or manual edit of XML file?
 
Robert Giuliano
KB8RCO


---------------------------------------------

From: "Burt Sammis kango03@... [aprsisce]"
To: "aprsisce@..."
Sent: Monday, July 14, 2014 8:23 AM
Subject: [aprsisce] Save settings

 
I have to reenter my settings each time I bring aprsisce.  I do not see any place to save the settings.
I am sure there is a place.  Please steer me to the place.
 
Burt
AF5AA 




Re: Save settings

Burt N Sammis
 

Thanks David.  Closing thru EXIT saved all the changes.
That saves a lot of key strokes.
Burt
AF5AA
 

To: aprsisce@...
From: aprsisce@...
Date: Mon, 14 Jul 2014 06:04:20 -0700
Subject: Re: [aprsisce] Save settings

 
Burt , I think if you go to file exit it saves them but if close by clicking X in upper right corner it won't.
73
David 

On Jul 14, 2014, at 5:23 AM, "Burt Sammis kango03@... [aprsisce]" <aprsisce@...> wrote:

 


I have to reenter my settings each time I bring aprsisce.  I do not see any place to save the settings.
I am sure there is a place.  Please steer me to the place.
 
Burt
AF5AA 



Re: Save settings

K7iou1 <k7iou1@...>
 

Burt , I think if you go to file exit it saves them but if close by clicking X in upper right corner it won't.
73
David 

On Jul 14, 2014, at 5:23 AM, "Burt Sammis kango03@... [aprsisce]" <aprsisce@...> wrote:

 

I have to reenter my settings each time I bring aprsisce.  I do not see any place to save the settings.
I am sure there is a place.  Please steer me to the place.
 
Burt
AF5AA 


Re: Save settings

Rob Giuliano
 

Are you talking about the PC version (APRSIS32) or the CE (APRSISce) version?
Better question, what device / operating system are you working with?
 
If this is a brand new install - Are you running it from "inside the zip file?"
  You must extract it to a directory where it can access the computer resources.
 
All the settings are kept in the XML file.
I can think of 2 main reason the application would not save the settings:
1. XML file is in a location that the operating system will not allow editing
2. The application (APRSISce or APRSIS32) is running, and you are editing the XML file.
   In this case, the application overwrites the XML file on exit, with data it has in memory.
   You must close the XML before making any "manual changes".
 
If you could describe your situation better, it would benefit our efforts to help:
1. What OS are you running?
2. Where are you running the application from?
   Ex: thumb drive, 'Program Files', Program Files (x86)', . . .
3. What changes are being made that are not being saved?
4. How are you making the change - Menu system or manual edit of XML file?
 
Robert Giuliano
KB8RCO


---------------------------------------------

From: "Burt Sammis kango03@... [aprsisce]"
To: "aprsisce@..."
Sent: Monday, July 14, 2014 8:23 AM
Subject: [aprsisce] Save settings

 
I have to reenter my settings each time I bring aprsisce.  I do not see any place to save the settings.
I am sure there is a place.  Please steer me to the place.
 
Burt
AF5AA 



Save settings

Burt N Sammis
 

I have to reenter my settings each time I bring aprsisce.  I do not see any place to save the settings.
I am sure there is a place.  Please steer me to the place.
 
Burt
AF5AA 


Re: Symbols Primary 45 and 46

william drew <wdrew60@...>
 

My code changes with the symbol or vice-versa.  What does the codes do?  My symbol reflects on the map.  Is it the code that make it so.  If the symbol changes and the code does not, does that mean the changed symbol does not reflect on the map when accepted?
 
William Drew, KC9ZWM
         217-726-1804


On Friday, July 11, 2014 6:37 PM, "'Steve' steve@... [aprsisce]" wrote:


 
Hey it’s my job to screw it all up and find features, I will be getting a down grade on pay soon
 
Steve
 

From: aprsisce@... [mailto:aprsisce@...]
Sent: 11 July 2014 22:51
To: aprsisce@...
Subject: RE: [aprsisce] Symbols Primary 45 and 46
 
 
Ooo, I found something! I feel good! ;)
 
Best regards,
Fred Hillhouse
 
 

From: aprsisce@... [mailto: aprsisce@... ]
Sent: Friday, July 11, 2014 5:41 PM
To: aprsisce@...
Subject: Re: [aprsisce] Symbols Primary 45 and 46
 
 
And you haven't tabbed off of the spin box, so I suspect the /- hasn't changed yet.  Or something like that.

No, I just duplicated this.  Apparently there's something about /. that doesn't want to display.  I'll see if I can look into that later.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 7/11/2014 4:34 PM, 'Fred Hillhouse Jr' fmhillhouse@... [aprsisce] wrote:
Hi Lynn,
 
Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?
 
Thanks!
 
Best regards,
Fred N7FMH
 
 



Re: Symbols Primary 45 and 46

sbd sbd
 

Hey it’s my job to screw it all up and find features, I will be getting a down grade on pay soon

 

Steve

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 11 July 2014 22:51
To: aprsisce@...
Subject: RE: [aprsisce] Symbols Primary 45 and 46

 

 

Ooo, I found something! I feel good! ;)

 

Best regards,

Fred Hillhouse

 

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: Friday, July 11, 2014 5:41 PM
To: aprsisce@...
Subject: Re: [aprsisce] Symbols Primary 45 and 46

 

 

And you haven't tabbed off of the spin box, so I suspect the /- hasn't changed yet.  Or something like that.

No, I just duplicated this.  Apparently there's something about /. that doesn't want to display.  I'll see if I can look into that later.


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/11/2014 4:34 PM, 'Fred Hillhouse Jr' fmhillhouse@... [aprsisce] wrote:

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 

 


Re: Symbols Primary 45 and 46

Fred Hillhouse
 

Ooo, I found something! I feel good! ;)

 

Best regards,

Fred Hillhouse

 

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: Friday, July 11, 2014 5:41 PM
To: aprsisce@...
Subject: Re: [aprsisce] Symbols Primary 45 and 46

 

 

And you haven't tabbed off of the spin box, so I suspect the /- hasn't changed yet.  Or something like that.

No, I just duplicated this.  Apparently there's something about /. that doesn't want to display.  I'll see if I can look into that later.


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/11/2014 4:34 PM, 'Fred Hillhouse Jr' fmhillhouse@... [aprsisce] wrote:

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 

 


Re: Symbols Primary 45 and 46 [2 Attachments]

Lynn Deffenbaugh
 

And you haven't tabbed off of the spin box, so I suspect the /- hasn't changed yet.  Or something like that.

No, I just duplicated this.  Apparently there's something about /. that doesn't want to display.  I'll see if I can look into that later.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/11/2014 4:34 PM, 'Fred Hillhouse Jr' fmhillhouse@... [aprsisce] wrote:

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 



Re: Symbols Primary 45 and 46

Fred Hillhouse
 

They are both /- though. I’ll look again.

 

Best regards,

Fred N7FMH

 

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: Friday, July 11, 2014 5:40 PM
To: aprsisce@...
Subject: Re: [aprsisce] Symbols Primary 45 and 46

 

 

Look closely.  One is 45 and the other is 46.


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 7/11/2014 4:34 PM, 'Fred Hillhouse Jr' fmhillhouse@... [aprsisce] wrote:

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 

 


Re: Symbols Primary 45 and 46 [2 Attachments]

Lynn Deffenbaugh
 

Look closely.  One is 45 and the other is 46.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32




On 7/11/2014 4:34 PM, 'Fred Hillhouse Jr' fmhillhouse@... [aprsisce] wrote:

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 



Symbols Primary 45 and 46

Fred Hillhouse
 

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 


Re: 300 BAUD OPERATION

Greg Isringhaus
 

Thanks Rob!

On Jul 10, 2014 10:02 PM, "Rob Giuliano kb8rco@... [aprsisce]" <aprsisce@...> wrote:
 

That setting is not used.  The TNC in use will determine "on-the-air" baud rate.
 
Robert Giuliano
KB8RCO


---------------------------------------------


From: "g.isringhaus@... [aprsisce]" <aprsisce@...>
To: aprsisce@...
Sent: Thursday, July 10, 2014 10:43 PM
Subject: [aprsisce] 300 BAUD OPERATION

 
Does APRSISCE no longer support 300 baud operation?  I'm trying to setup a port using AGW and it is only showing a shaded 1200 baud.  It will not let me select any other baud rate.



Re: 300 BAUD OPERATION

Rob Giuliano
 

That setting is not used.  The TNC in use will determine "on-the-air" baud rate.
 
Robert Giuliano
KB8RCO


---------------------------------------------


From: "g.isringhaus@... [aprsisce]"
To: aprsisce@...
Sent: Thursday, July 10, 2014 10:43 PM
Subject: [aprsisce] 300 BAUD OPERATION

 
Does APRSISCE no longer support 300 baud operation?  I'm trying to setup a port using AGW and it is only showing a shaded 1200 baud.  It will not let me select any other baud rate.



300 BAUD OPERATION

Greg Isringhaus
 

Does APRSISCE no longer support 300 baud operation?  I'm trying to setup a port using AGW and it is only showing a shaded 1200 baud.  It will not let me select any other baud rate.


Re: Q Codes ??

eckerpw@...
 

Lynn - I now understand. Thank you very much. Your assistance is always much appreciated.

73 Paul
kc2nyu


Re: Q Codes ??

Lynn Deffenbaugh
 

See http://www.aprs-is.net/q.aspx

Packets with q-constructs have passed through the APRS-IS.

However, if you're only viewing stations received on RF, don't panic.  This view option shows stations that were received at least once recently via RF.  However, the popup information is derived from the most recent packet received which may have been via the APRS-IS.

And also do not worry about receiving packets from the APRS-IS even though you might not have a filter, or the packet doesn't seem to match your filter.  The APRS-IS "filtered" port (typically 14580) is actually an "IGate" port.  It will assume that the connection is from an IGate and any station whose packet that you've gated into the APRS-IS will be added to the server's "recently heard" list.  For some period of time (30 minutes to 2 hours or so), all packets from that station will be delivered to any IGate port that has "seen" the station.  Also, any messages addressed to such stations will also be delivered.  This is done so that the IGate can deliver its required functionality.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


On 7/9/2014 3:29 PM, eckerpw@... [aprsisce] wrote:

Not sure if that is the correct label. Here's my question: I have selected under - View- RF- All; wanting to display just stations that are being received at my QTH via RF. When I right click on  stations on the map, the bottom entry in the pop up box is RF and if I select that I see the RF path of that station to my location. However on some when I right click, instead of RF, I see entries that begin with qAC, qAS or qAR. I am sure the answer is obvious but what do these codes or abbreviations mean ??


Tnx & 73

Paul

kc2nyu


10481 - 10500 of 36355