Date   

Re: Symbols Primary 45 and 46

Fred Hillhouse
 

They are both /- though. I’ll look again.

 

Best regards,

Fred N7FMH

 

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: Friday, July 11, 2014 5:40 PM
To: aprsisce@...
Subject: Re: [aprsisce] Symbols Primary 45 and 46

 

 

Look closely.  One is 45 and the other is 46.


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 7/11/2014 4:34 PM, 'Fred Hillhouse Jr' fmhillhouse@... [aprsisce] wrote:

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 

 


Re: Symbols Primary 45 and 46 [2 Attachments]

Lynn Deffenbaugh
 

Look closely.  One is 45 and the other is 46.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32




On 7/11/2014 4:34 PM, 'Fred Hillhouse Jr' fmhillhouse@... [aprsisce] wrote:

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 



Symbols Primary 45 and 46

Fred Hillhouse
 

Hi Lynn,

 

Something doesn’t make sense to me. The symbols are different but the codes look the same. What s it I am not seeing?

 

Thanks!

 

Best regards,

Fred N7FMH

 


Re: 300 BAUD OPERATION

Greg Isringhaus
 

Thanks Rob!

On Jul 10, 2014 10:02 PM, "Rob Giuliano kb8rco@... [aprsisce]" <aprsisce@...> wrote:
 

That setting is not used.  The TNC in use will determine "on-the-air" baud rate.
 
Robert Giuliano
KB8RCO


---------------------------------------------


From: "g.isringhaus@... [aprsisce]" <aprsisce@...>
To: aprsisce@...
Sent: Thursday, July 10, 2014 10:43 PM
Subject: [aprsisce] 300 BAUD OPERATION

 
Does APRSISCE no longer support 300 baud operation?  I'm trying to setup a port using AGW and it is only showing a shaded 1200 baud.  It will not let me select any other baud rate.



Re: 300 BAUD OPERATION

Rob Giuliano
 

That setting is not used.  The TNC in use will determine "on-the-air" baud rate.
 
Robert Giuliano
KB8RCO


---------------------------------------------


From: "g.isringhaus@... [aprsisce]"
To: aprsisce@...
Sent: Thursday, July 10, 2014 10:43 PM
Subject: [aprsisce] 300 BAUD OPERATION

 
Does APRSISCE no longer support 300 baud operation?  I'm trying to setup a port using AGW and it is only showing a shaded 1200 baud.  It will not let me select any other baud rate.



300 BAUD OPERATION

Greg Isringhaus
 

Does APRSISCE no longer support 300 baud operation?  I'm trying to setup a port using AGW and it is only showing a shaded 1200 baud.  It will not let me select any other baud rate.


Re: Q Codes ??

eckerpw@...
 

Lynn - I now understand. Thank you very much. Your assistance is always much appreciated.

73 Paul
kc2nyu


Re: Q Codes ??

Lynn Deffenbaugh
 

See http://www.aprs-is.net/q.aspx

Packets with q-constructs have passed through the APRS-IS.

However, if you're only viewing stations received on RF, don't panic.  This view option shows stations that were received at least once recently via RF.  However, the popup information is derived from the most recent packet received which may have been via the APRS-IS.

And also do not worry about receiving packets from the APRS-IS even though you might not have a filter, or the packet doesn't seem to match your filter.  The APRS-IS "filtered" port (typically 14580) is actually an "IGate" port.  It will assume that the connection is from an IGate and any station whose packet that you've gated into the APRS-IS will be added to the server's "recently heard" list.  For some period of time (30 minutes to 2 hours or so), all packets from that station will be delivered to any IGate port that has "seen" the station.  Also, any messages addressed to such stations will also be delivered.  This is done so that the IGate can deliver its required functionality.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


On 7/9/2014 3:29 PM, eckerpw@... [aprsisce] wrote:

Not sure if that is the correct label. Here's my question: I have selected under - View- RF- All; wanting to display just stations that are being received at my QTH via RF. When I right click on  stations on the map, the bottom entry in the pop up box is RF and if I select that I see the RF path of that station to my location. However on some when I right click, instead of RF, I see entries that begin with qAC, qAS or qAR. I am sure the answer is obvious but what do these codes or abbreviations mean ??


Tnx & 73

Paul

kc2nyu



Q Codes ??

eckerpw@...
 

Not sure if that is the correct label. Here's my question: I have selected under - View- RF- All; wanting to display just stations that are being received at my QTH via RF. When I right click on  stations on the map, the bottom entry in the pop up box is RF and if I select that I see the RF path of that station to my location. However on some when I right click, instead of RF, I see entries that begin with qAC, qAS or qAR. I am sure the answer is obvious but what do these codes or abbreviations mean ??


Tnx & 73

Paul

kc2nyu


Re: Inode problem can you see?

Fred Hillhouse
 

Just delete the XML file. That gets rid of all the configuration stuff.

 

Best regards,

Fred N7FMH

 

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: Wednesday, July 09, 2014 1:21 PM
To: aprsisce@...
Subject: Re: [aprsisce] Inode problem can you see?

 

 


I want to start over.. new install.. Just how do I completely remove
all of the programs files etc from my computer?

Glancing through the Docs I just don't see the info.

Scotty


Re: Inode problem can you see?

Rob Giuliano
 

You can delete the whole directory, but my recommendation would be to delete the following files:
   APRSIS32.EXE           (since you think it is corrupt and want to download it fresh)
   *.log
   *.xml
NOTE: leaving the Maps directory will reduce downloads.
Put the APRSIS32.exe file in the directory, and double-click .
 
 
BTW - if you delete *.LOG and *.xml and run the EXE, it will start fresh (I really would be surprised if the EXE is corrupt).
 
Robert Giuliano
KB8RCO


---------------------------------------------

From: "Scotty Gray N7CTF scooters@... [aprsisce]"
To: aprsisce@...
Sent: Wednesday, July 9, 2014 1:20 PM
Subject: Re: [aprsisce] Inode problem can you see?

 

I want to start over.. new install.. Just how do I completely remove
all of the programs files etc from my computer?

Glancing through the Docs I just don't see the info.

Scotty




Re: Inode problem can you see? [1 Attachment]

Scotty
 

I want to start over.. new install.. Just how do I completely remove all of the programs files etc from my computer?

Glancing through the Docs I just don't see the info.

Scotty


Re: Monitored packet ??

Lynn Deffenbaugh
 

In the APRS world, the destination has nothing to do with a station, but is an "Application Identifier".  From http://www.aprs.org/aprs11/tocalls.txt we see that APOTxx is assiged to the Open Track family of products.  W7PG-7 is apparently running an OpenTracker of some sort and is sending a status report (>) containing voltage and temperature and also sending a weather-containing posit (! with a symbol of /_).

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 7/9/2014 11:23 AM, scooters@... [aprsisce] wrote:

Hi,  

Still trying to redo my aprsis32.. but on the way I reconfigured my tnc as a "moutain-top Digi".. and let it play for a bit.  I was monitoring traffic and came across the following. :




W7PG-7>APOTC1,WIDE3-3: :> 13.8V 28C
W7PG-7>APOTC1,WIDE3-3: :!4734.13N/10656.47W_056/000g000t075P000h46OD1w

Now look up APOTC1 on aprs.fi.

I'm in NE Montana..  and you'll see where the APOTC1 is.  Not sure I understand this but there must be some reason it's there.


Scott




Re: Monitored packet ??

Rob Giuliano
 

APOTC1 is a "destination call" or "AltNet" callsign.  You will find many different possibilities here:
 
Someone must have set their callsign to those letters at some point (looks like > 105 days ago) and so it shows up on APRSIS.FI.
 
Robert Giuliano
KB8RCO


---------------------------------------------

From: "scooters@... [aprsisce]"
To: aprsisce@...
Sent: Wednesday, July 9, 2014 11:23 AM
Subject: [aprsisce] Monitored packet ??

 
Hi,  
Still trying to redo my aprsis32.. but on the way I reconfigured my tnc as a "moutain-top Digi".. and let it play for a bit.  I was monitoring traffic and came across the following. :



W7PG-7>APOTC1,WIDE3-3: :> 13.8V 28C
W7PG-7>APOTC1,WIDE3-3: :!4734.13N/10656.47W_056/000g000t075P000h46OD1w

Now look up APOTC1 on aprs.fi.

I'm in NE Montana..  and you'll see where the APOTC1 is.  Not sure I understand this but there must be some reason it's there.

Scott




Monitored packet ??

Scotty
 

Hi,  

Still trying to redo my aprsis32.. but on the way I reconfigured my tnc as a "moutain-top Digi".. and let it play for a bit.  I was monitoring traffic and came across the following. :




W7PG-7>APOTC1,WIDE3-3: <UI>:> 13.8V 28C
W7PG-7>APOTC1,WIDE3-3: <UI>:!4734.13N/10656.47W_056/000g000t075P000h46OD1w

Now look up APOTC1 on aprs.fi.

I'm in NE Montana..  and you'll see where the APOTC1 is.  Not sure I understand this but there must be some reason it's there.


Scott



Re: NWS Weather Warnings,

Fred Hillhouse
 

Check your message settings. Select “but not NWS” and I think that will fix it. Of course, I am assuming you are talking about the message that come from them.

 

Best regards,

Fred N7FMH

 

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: Wednesday, July 09, 2014 12:28 AM
To: aprsisce@...
Subject: [aprsisce] NWS Weather Warnings,

 

 

Hello All,

Really like the weather warnings for the areas I have selected. What I
don't care for are the repeated weather warnings every ten or fifteen
minutes. Anyway to cure that?

73,

Ken KB6KB


Re: NWS Weather Warnings,

Lynn Deffenbaugh
 

Is it the arriving message that you don't like, or are you getting the MultiTrack popping up every time?

If it is the former, that's the nature of the beast. If it's the latter, you can check Configure / NWS / Popup MultiTrack / Only If New.

The warnings are generated periodically while they are in force, so we can't affect the source. And once you clear (read) the message, it will look new when received again. If you receive multiple copies before reading one, you should see a (*N-hh:mm:ss) at the end of the message. That means you received it N times with hh:mm:ss being the most recent. The leading mm-dd hh:mm:ss is the time the first copy of the message was received.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/9/2014 12:28 AM, Ken kb6kb@... [aprsisce] wrote:
Hello All,

Really like the weather warnings for the areas I have selected. What I
don't care for are the repeated weather warnings every ten or fifteen
minutes. Anyway to cure that?

73,

Ken KB6KB


------------------------------------
Posted by: Ken <kb6kb@...>
------------------------------------


------------------------------------

Yahoo Groups Links




NWS Weather Warnings,

Ken
 

Hello All,

Really like the weather warnings for the areas I have selected. What I don't care for are the repeated weather warnings every ten or fifteen minutes. Anyway to cure that?

73,

Ken KB6KB


Re: DX Aggregator

James Ewen
 

Oh, I think I see the problem...

I have my T3 Micro connected between my laptop and my FT-897, and I
fired off a packet from my TH-D72...

Here's what I saw on the local server port via telnet:

VE6SRV-7>UVQRUQ,WIDE2-2,qAR,VE6SRV-9:`-'xl#V[/>"9i}=

Because the local server port is acting like it's being an APRS-IS
server, it is putting in the qAR construct.

DX Aggregator probably sees that as a packet being seen via the
internet, rather than a raw local packet...

I don't know if we can get a raw RF feed out of APRSISCE/32.

Lynn, what's the verdict?

--
James
VE6SRV


Re: DX Aggregator

James Ewen
 

Helge,


Lynn may be able to speak to that...


The local server port acts just like an APRS-IS port, and can handle filters.


You can probably define a filter that would only serve packets heard
locally on RF out the server port.


I'm not sure what you are trying to say here:


I stopped monitoring to varity that my RF’s are not ping-pong reflected by
the APRS-IS and then showing up: no, it is all up to the best.

I think you mean you shut off your APRS-IS feed, possibly.


I'd have to see what UI-View is dumping out it's local port, and
compare that to what APRSISCE/32 dumps out it's local port to see if
there's something no right in respect to what DX Aggregator is looking
for.


I've never run the program, but it looks like it is looking for a raw
RF feed, similar to what APRSISCE/32 does when it sends home all of
it's heard data back to Lynn.


You can telnet to 127.0.0.1:1448 to see exactly what is being fed out
from APRSISCE/32.


James
VE6SRV




On Mon, Jul 7, 2014 at 11:32 AM, DF8LS <DF8LS@...> wrote:
Hi James,

coming back to your helping info concerning the DX Aggregator V1.6

Everything is running as exspected the only thing:

It does not differ between TCPIP’s floating in and radio received beacons.

I stopped monitoring to varity that my RF’s are not ping-pong reflected by
the APRS-IS and then showing up: no, it is all up to the best.

But no DX is reconized and consequently non send.

Any idea on that?

73
Helge, DF8LS





--
James
VE6SRV

10441 - 10460 of 36303