Date   

Re: Thanks Lynn

sbd sbd
 

I have a bigger one that includes the family, must admit it’s awkward to use my keys

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 20 December 2012 01:10
To: aprsisce@...
Subject: Re: [aprsisce] Thanks Lynn

 

I ALWAYS know where my towel is.  As a matter of fact, I got a new one for Christmas last year from my daughter because my old one was getting rather ragged.  I carry it in my geocaching belt-purse because you never know what you may need while out on a caching run.

Lynn (D) - KJ4ERJ - aka CodeWrangler



On 12/19/2012 6:37 PM, john Beatty wrote:

Grab your towel and don't panic!

 

Credo Quia Absurdum Est
Credo Ut Intelligam

 

 


From: Steve Daniels
To: aprsisce@...
Sent: Wed, December 19, 2012 3:02:48 PM
Subject: [aprsisce] Thanks Lynn

 

Since the end of the world is Friday, I thought I would say thank you to Lynn for the software and all those who helped come up with suggestions etc.

In fact anyone who has created free software for Amateurs

 

I wonder if we will find out what the question was, the answer to which was 42

Are the Astronomers looking out for a suddenly appearing Vogon Constructor Fleet

Anyway So long, and thanks for all the fish

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 

 


Re: Thanks Lynn

Lynn Deffenbaugh
 

I ALWAYS know where my towel is.  As a matter of fact, I got a new one for Christmas last year from my daughter because my old one was getting rather ragged.  I carry it in my geocaching belt-purse because you never know what you may need while out on a caching run.

Lynn (D) - KJ4ERJ - aka CodeWrangler



On 12/19/2012 6:37 PM, john Beatty wrote:

Grab your towel and don't panic!
 
Credo Quia Absurdum Est
Credo Ut Intelligam



From: Steve Daniels
To: aprsisce@...
Sent: Wed, December 19, 2012 3:02:48 PM
Subject: [aprsisce] Thanks Lynn

 

Since the end of the world is Friday, I thought I would say thank you to Lynn for the software and all those who helped come up with suggestions etc.

In fact anyone who has created free software for Amateurs

 

I wonder if we will find out what the question was, the answer to which was 42

Are the Astronomers looking out for a suddenly appearing Vogon Constructor Fleet

Anyway So long, and thanks for all the fish

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 



Re: Thanks Lynn

sbd sbd
 

A spot of Tea would be correct, at least for your grandfathers generation. Not a big fan of Tea myself either.

Will get a APRSISCE/32 café sorted for these user of APRSISCE/32 posts that are not technical..

It’s nice to have a non tech chat with fellow users of APRSISCE/32 without boring the rest of the users

And yes I am more guilty than most.

 

If you have not found Dirk Gently look it up

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of kc8sfq@...
Sent: 20 December 2012 00:24
To: aprsisce@...
Subject: RE: [aprsisce] Thanks Lynn

 

 


I was in a buffet restaurant one evening here in Mich. The fellow ahead of me had on a "T" shirt with the inscription "Do you know Zaphod Beeblebrox?" I started laughing, he turned around with a devilish grin. I said "as a matter of fact, i *do*". We had a delightful dinner, he and a table of friends were at the next table. Too obscure, and too much fun.

I never could stand tea, much to my grandfather's chagrin. His world stopped every afternoon for tea. As ANY civilized man would do. If my memory serves, he called it "a spot of tea".



> Being English I have several hot cups of tea at the ready, am trying get things sorted
>
> Am leaving Fred Hillhouse out of it as he lives too close to Boston.


Re: Video of APRSISCE/32 In Operation

kc8sfq
 

Hi Fred,
Nice video. What's the music? I want more of it.

73,  KC8SFQ
++++++++++++
> I have just added a post to our Blog which includes a video of
> APRSISCE/32 in operation as well as some additional information about
> our APRS Station. The video show's APRS iGating packets received by a
> Kenwood D710A transceiver. I am hoping that some of the readers of this
> group might find the video and associated information interesting. You
> can view our blog by clicking here
>  .
> - Fred (AB1OC)
>


Re: Thanks Lynn

kc8sfq
 


I was in a buffet restaurant one evening here in Mich. The fellow ahead of me had on a "T" shirt with the inscription "Do you know Zaphod Beeblebrox?" I started laughing, he turned around with a devilish grin. I said "as a matter of fact, i *do*". We had a delightful dinner, he and a table of friends were at the next table. Too obscure, and too much fun.

I never could stand tea, much to my grandfather's chagrin. His world stopped every afternoon for tea. As ANY civilized man would do. If my memory serves, he called it "a spot of tea".



> Being English I have several hot cups of tea at the ready, am trying get things sorted
>
> Am leaving Fred Hillhouse out of it as he lives too close to Boston.


Re: Thanks Lynn

sbd sbd
 

Being English I have several hot cups of tea at the ready, am trying get things sorted

Am leaving Fred Hillhouse out of it as he lives too close to Boston.

 

Good to see at least 3 others of you know what I am talking about (Lynn being one hence the post really)

For the rest of you will explain it on the 22nd

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Randy Love
Sent: 19 December 2012 23:33
To: aprsisce@...
Subject: Re: [aprsisce] Thanks Lynn

 

 

You're right, Steve.

 

The fleet should arrive on Thursday. "never could get the hang of Thursdays", Arthur said.

 

Anyway, I've got my towel handy.

 

So long, Lynn, and thanks for all the dev releases... :)

 

Randy

WF5X

On Wed, Dec 19, 2012 at 6:02 PM, Steve Daniels <steve@...> wrote:

 

Since the end of the world is Friday, I thought I would say thank you to Lynn for the software and all those who helped come up with suggestions etc.

In fact anyone who has created free software for Amateurs

 

I wonder if we will find out what the question was, the answer to which was 42

Are the Astronomers looking out for a suddenly appearing Vogon Constructor Fleet

Anyway So long, and thanks for all the fish

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 

 


Re: APRIS32 Transmit stops Kenwood D710 from decoding packets. [2 Attachments]

Tony VE6MVP
 

At 04:16 PM 2012-12-19, Adam Mahnke wrote:

for PHYSICAL ports on the D710 there are two, for communication with APRSISCE/32 you would be connected to the one on the back of the display panel(COM Port), which you said you have done. The one on the radio body is for memory programming (PC Port).

Right.  And if you go back to the log I posed in my original email you will see some APRS packets which were received by APRSIS32.  Which would not have been the case if the D710 port in use was the one on the body.    I have been running APRSIS just fine for several months.   This behavior is new and might've been caused by me changing some setting somewhere and not recalling exactly what it might've been.

In APRSISCE32 Configure->ports->New

KWD710(APRS) automatically puts the D710 into it's Native APRS mode, and allows APRSISCE32 to receive and decode packets from the D710 and display them, as well as gate them to the IS stream if that is set up.

I just went to the port in APRSIS and it is indeed KWD710(APRS)   as well as 9600 8N1.

I was curious as to what mode the D710 TNC was in when you first launched the APRSISCE32 program,

I have no idea how you would tell what mode the TNC is using which of the 50 or 100 icons or so.  The only relevant one I know states APRS12.

You'll see a caution on the above referenced wiki page that says it can be confusing using APRSISCE32 to control a D710 in APRS mode, and while I may be mistaken, I think that is the case with your set up, of course I may be wrong. (it does happen quite often, but that's how I learn)

I didn't realize that web page existed.  I hooked up my D710 and it has been working just fine for a number of months.

If you chose the KWD710(APRS) option, the D710 handles all APRS functions, APRSISCE32 is a very handy display tool, but it should not be used for controlling beacons through the radio (by hitting transmit) It can confuse the D710 TNC and cause issues.

But you also need APRIS32 to be able to acknowledge messages.  Which it has been doing just fine for months so I would think I need that capability.

Now one difference is that I do have Beacon checked whereas that page does not.   I'm pretty sure I've had Beacon checked for a long time but who knows.  I'll turn that off and see if it makes a difference.

The other possibility that I have in mind is that the com speed setting not being the same between APRSISCE32 and the D710, so the radio is receiving something, but then it can't read the rest of it so it has no idea what to do.
Please refer to the attached "Port Configuration.jpg" and menu #528 under AUX and make sure that they are the same.

They were both set to 9600 bps.

Tony


Re: Thanks Lynn

Steve
 

I believe I saw a long range forecast for Friday with the days HIGH at 2500 Degrees, or as the Sun in the UK would say..."PHEW WHAT A SCORCHER"  lol

Thanks Lynn....."Goodbye World"

73
Steve,  kf6wax.....already living in hells kitchen, Phoenix, Arizona




On Wed, Dec 19, 2012 at 4:02 PM, Steve Daniels <steve@...> wrote:
 

Since the end of the world is Friday, I thought I would say thank you to Lynn for the software and all those who helped come up with suggestions etc.

In fact anyone who has created free software for Amateurs

 

I wonder if we will find out what the question was, the answer to which was 42

Are the Astronomers looking out for a suddenly appearing Vogon Constructor Fleet

Anyway So long, and thanks for all the fish

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 



Re: Thanks Lynn

john beatty
 

Grab your towel and don't panic!
 
Credo Quia Absurdum Est
Credo Ut Intelligam



From: Steve Daniels
To: aprsisce@...
Sent: Wed, December 19, 2012 3:02:48 PM
Subject: [aprsisce] Thanks Lynn

 

Since the end of the world is Friday, I thought I would say thank you to Lynn for the software and all those who helped come up with suggestions etc.

In fact anyone who has created free software for Amateurs

 

I wonder if we will find out what the question was, the answer to which was 42

Are the Astronomers looking out for a suddenly appearing Vogon Constructor Fleet

Anyway So long, and thanks for all the fish

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 


Re: Thanks Lynn

Randy Love
 

You're right, Steve.

The fleet should arrive on Thursday. "never could get the hang of Thursdays", Arthur said.

Anyway, I've got my towel handy.

So long, Lynn, and thanks for all the dev releases... :)

Randy
WF5X

On Wed, Dec 19, 2012 at 6:02 PM, Steve Daniels <steve@...> wrote:
 

Since the end of the world is Friday, I thought I would say thank you to Lynn for the software and all those who helped come up with suggestions etc.

In fact anyone who has created free software for Amateurs

 

I wonder if we will find out what the question was, the answer to which was 42

Are the Astronomers looking out for a suddenly appearing Vogon Constructor Fleet

Anyway So long, and thanks for all the fish

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 



Re: APRIS32 Transmit stops Kenwood D710 from decoding packets.

Adam Mahnke <kc2ant@...>
 

Tony,

Lets start over again.  Please reference http://aprsisce.wikidot.com/port:kenwood-tm-d710 as I go through my understanding of how APRSISCE32 interacts with a D710.

for PHYSICAL ports on the D710 there are two, for communication with APRSISCE/32 you would be connected to the one on the back of the display panel(COM Port), which you said you have done. The one on the radio body is for memory programming (PC Port).


In APRSISCE32 Configure->ports->New

KWD710(APRS) automatically puts the D710 into it's Native APRS mode, and allows APRSISCE32 to receive and decode packets from the D710 and display them, as well as gate them to the IS stream if that is set up.

KWD710(Pkt) Automatically puts the D710 into Packet mode, which puts APRSISCE32 in full control of the radio's TNC, as it would any other Radio/TNC combination.


I was curious as to what mode the D710 TNC was in when you first launched the APRSISCE32 program, AND which of the above KWD710 choices you'd chosen when setting up the new port. Please refer to attached "New Port Screen.jpg"

You'll see a caution on the above referenced wiki page that says it can be confusing using APRSISCE32 to control a D710 in APRS mode, and while I may be mistaken, I think that is the case with your set up, of course I may be wrong. (it does happen quite often, but that's how I learn)

If you chose the KWD710(APRS) option, the D710 handles all APRS functions, APRSISCE32 is a very handy display tool, but it should not be used for controlling beacons through the radio (by hitting transmit) It can confuse the D710 TNC and cause issues.

If you chose the KWD710(Pkt) then the D710 display will not decode and display any received packets, and ALL APRS function will be handled by APRSISCE32.

The other possibility that I have in mind is that the com speed setting not being the same between APRSISCE32 and the D710, so the radio is receiving something, but then it can't read the rest of it so it has no idea what to do.
Please refer to the attached "Port Configuration.jpg" and menu #528 under AUX and make sure that they are the same.


There may be more going on here, but without knowing what your end goal of what your set up desires are, it's hard to help you get there. (for me anyway)


Hopefully this makes more sense then my last attempt at a reply.

Adam
KC2ANT





To: aprsisce@...
From: tony@...
Date: Wed, 19 Dec 2012 11:23:15 -0700
Subject: RE: [aprsisce] APRIS32 Transmit stops Kenwood D710 from decoding packets.

 
At 05:08 AM 2012-12-19, Adam Mahnke wrote:


Which of the 2 D710 ports are you using?

The APRS one allows the D710 to stay in it's native APRS mode and still send packets to aprsisce/32 for display.

The packet mode turns the D710 into a radio with TNC and the D710 won't decode anything.

Which two parts are you talking about?    The physical ports one of which is in the radio body and used to program the memory channels and the other which is in the head and is the TNC?    If so I'm hooked up to the TNC port in the head. 

Or do you mean there are two COM ports in Windws?   Which there aren't.

Or do you mean something else?

Can you share your radio settings at start,

So you want me to go through every menu item on the D710 and write them down?

your port configuration choices for aprsisce32, to include the kwdD710 port style you've chosen.

9600 bps and 8N1 if that's what you mean.

And then what is displayed on the radio face after transmit with aprsisce32

Which if the 100 or so icons are you specifically interested in?

Tony

-----Original Message-----

From: Tony VE6MVP
Sent: 19 Dec 2012 07:43:37 GMT
To: aprsisce@...
Subject: [aprsisce] APRIS32 Transmit stops Kenwood D710 from decoding packets.

 

Folks

When I click on Transmit in APRSIS32 I see the following in the port log.    Then the Kenwood  D710 TNC stops decoding packets on the D710 display until I do a power off/on cycle on the D710 radio.  Whereupon the D710 starts decoding packets and sending them to APRSIS32.

Port(KwdD710):2012-12-19T07:21:39.590 Kenwood[85]:INSFRE>APOT30,ELKPNT,VERMLN,WIDE2*:!5322.58NS11131.71W#PHG3530\W2,AB7,Innisfree VA6BF
Port(KwdD710):2012-12-19T07:21:41.836 Kenwood[79]:INSFRE>APOT30,LLOYD*,WIDE2-1:!5322.58NS11131.71W#PHG3530\W2,AB7,Innisfree VA6BF
>>>>   I hit the transmit menu item.
Port(KwdD710):2012-12-19T07:22:36.436 Command[4]:TC 0
Port(KwdD710):2012-12-19T07:22:36.436 Output[5]:TC 0<0D>
Port(KwdD710):2012-12-19T07:22:36.499 Command[3]:^M~
Port(KwdD710):2012-12-19T07:22:36.499 Output[1]:<0D>
Port(KwdD710):2012-12-19T07:22:37.513 Missed Expected Response(cmd:) From Command(^M~!cmd:!1)
Port(KwdD710):2012-12-19T07:23:56.651 Kenwood[14]:KWXIMON  was 0
>>>>> Several packets were received but not displayed on the D710 or received by APRSIS32
>>>>> power cycle D710
Port(KwdD710):2012-12-19T07:24:06.402 Kenwood[98]:VE6RHS>APWW10,CHPMAN,INSFRE,WIDE2*:/002400h5331.82N/11326.74W_031/000g000t-00r000p002P000h66b00000
Port(KwdD710):2012-12-19T07:24:12.096 Kenwood[94]:BICHE>APOT21,ELKPNT,WIDE2*:!5446.95NS11213.12W#CNT00000 PHG4530/W2,  ABn,  Lac La Biche VE6SRV

I have hit the Transmit button a number of times in the past few months and the local digis have happily sent back my beacon.    But not now.  This also happens when I go to send an APRS message which I've done lots of although not in the past few weeks.   Restarting APRSIS 32 does not help and there is a very similar if not identical message at the bottom of the port log.

Any ideas what I might be doing wrong?

Tony


Re: DSP SoundDoppler

sbd sbd
 

I suggest you chat to Lynn about a way to integrate sounddoppler and aprsisce/32 . From my point of view the less different bits of software the better.

So APRSISCE/32 feeding the gps to sounddoppler and then sounddoppler feeding the data back to APRSISCE/32 for display on the map and RDF info output to APRS.

If I read your writeup correctly currently about 5 or 6 pieces of software would be need.

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of pa3bnx
Sent: 18 December 2012 18:46
To: aprsisce@...
Subject: [aprsisce] DSP SoundDoppler

 

 

Hello All,

Lots of information to process for me hi.

My software runs as follows:

GPS.exe gets GPS data through rs232
and extract it
Then it goes from gps.exe to SoundDoppler.exe through so called DDE links.

And then SoundDoppler can create a file Packet.txt
That has the averaged heading and all other Gps data

That file is read by MyMapping and then showed processed
on a UI-view32 map.

MyMapping can do:
Plot, save, log on maps.
Speak headings
Only plot fixes (puts dots only on the map where
to arrows crosses)

FTP with files remotepacket.txt and localpacket.txt
to other PC with MyMapping running.

MyMapping can also read GPS nmea + agrelo
Plot it and FTP lokalpacket and remotepacket.txt

But gps.exe is also capable of extracting GPS + Agrelo
data and send out Modified $GPRMC strings for all kind
of other map programs.

Gps.exe + SoundDoppler can send through comport again
modified $GPRMC So there is a DDE link from SoundDoppler
to Gps.exe with the heading of the sounddoppler.

SoundDoppler can save all audio in wave files.
Log in kml files or send strings to a URL according
DL5DI format

http://db0myk.prgm.org/peiler.php?p1=52.21667,5.16666,25.0,45,8

Explained
25.0,45,5
25 degrees, wide 45 degrees, 5 quality

So if SoundDoppler is running
i can right click on yellow packet text en type
145600kHz

and then that message travels through packet.txt direct
or through FTp to MyMapping and set the ft817 on frequency.

Thats what i mean with remote controlled frequency
of other DF stations.

So it would be nice if a aprs application could
get the Packet.txt data through a URL string.

So every body can watch.

Thats why DL5DI the Kalmit gruppe in Germany works on a
MySQL data base and simple URL string format
to distribute the aprs data to other vieuwer hunters.

If this url could send back a map in the DL5DI
sounddoppler.exe internal browser screen back with al headings
that woold be very cool hi.

So there is room for lots more of programming and software.

We are building a one cable feed softswitcher with 8
antennas

Take a look at
http://www.zendamateur.com/viewtopic.php?f=14&t=9124&start=315

For pictures and scoop pictures.

have fun APRS and DF finding.


Thanks Lynn

sbd sbd
 

Since the end of the world is Friday, I thought I would say thank you to Lynn for the software and all those who helped come up with suggestions etc.

In fact anyone who has created free software for Amateurs

 

I wonder if we will find out what the question was, the answer to which was 42

Are the Astronomers looking out for a suddenly appearing Vogon Constructor Fleet

Anyway So long, and thanks for all the fish

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 


Re: taskbar icon

sbd sbd
 

I realise but I had all that turned off and now it’s back on it seems, seem to recall I ran a program to do it, will figure it out

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 22:26
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

If you have the default directory under Program Files in Vista or Windows 7, then Windows will likely get upset about it, or require you to run it with elevated privileges.  APRSISCE/32 writes the logs and configuration (and tiles by default) to the default directory at runtime.  Newer versions of WIndows don't consider this "proper" behavior and actually redirect those writes to an alternate directory buried deep within your user profile.  The stupid thing is that if the file being written previously existed in the Program Files directory, that'll be the one the program next reads rather than the one that Windows re-directed the writes to.

Hence the warning on http://aprsisce.wikidot.com/initial-startup


Note: Windows 7 and Windows Vista users: Do NOT put this directory under "Program Files" or any other Windows-Protected directory or the About-based automatic update will not work properly.


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 5:10 PM, Steve Daniels wrote:

I think it’s UAC or DEP the aprsis instance is under my program files, the other instance is not and does not have the security icon.

I turned off firewall and also the file protection once using a program forgot what it’s called

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Colin XSD
Sent: 19 December 2012 22:05
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

Hi Lynn,

The 'admin privileges' was just an example, they seem to be there for various reasons. I think it just means there is something unusual about the program (no insult on APRSIS32 intended), I don't use the Windows Firewall (I use something else) so that might explain the difference.


73,
Colin
M0XSD.

On 19/12/2012 21:55, Lynn W Deffenbaugh (Mr) wrote:

APRSISCE/32 should not need administrator privileges for anything.  It is strictly a user-mode program.

Now, if they've updated something in the firewall, that might cause a flag.  As you would expect, APRSISCE/32 uses the network rather extensively.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 4:45 PM, Colin XSD wrote:

Hi Steve,

Has Windows done an update on your Computer recently?, it is just that I have noticed a few more of my Icons (on my Desktop) with the Shield added to the Icon since a recent update, I think it is just a general warning, like things that need admin privileges to run but I haven't got it on APRSIS32 (yet).


73,
Colin
M0XSD.

On 19/12/2012 21:25, Steve Daniels wrote:

 

OK thanks thought it might be APRSIS telling me something, it’s only just appeared so I need to find what to turn off in windows

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of James Ewen
Sent: 19 December 2012 19:58
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

That would be Windows keeping you safe. I don't know for sure what it is, but it is most likely your firewall blocking you, or maybe an antivirus program keeping you safe from that nasty program.

 

James 

On Wed, Dec 19, 2012 at 12:45 PM, Steve Daniels <steve@...> wrote:

[Attachment(s) from Steve Daniels included below]

Hopefully this will get through

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 18:14
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

Screenshot would be useful.  I'm not at all sure what you're seeing, but I don't recall doing anything like that.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 1:03 PM, Steve Daniels wrote:

Not seen this before, I have a yellow and blue colour circle on top of the APRSISCE/32 taskbar icon, does it have any significance?

Will screenshot it if required

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 

 

 

Attachment(s) from Steve Daniels

1 of 1 Photo(s)



 

--
James
VE6SRV

 

 

 

 


Re: taskbar icon

Fred Hillhouse
 

Wasn't that section written by Steve himself? ;)
 
 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: Wednesday, December 19, 2012 17:26
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

If you have the default directory under Program Files in Vista or Windows 7, then Windows will likely get upset about it, or require you to run it with elevated privileges.  APRSISCE/32 writes the logs and configuration (and tiles by default) to the default directory at runtime.  Newer versions of WIndows don't consider this "proper" behavior and actually redirect those writes to an alternate directory buried deep within your user profile.  The stupid thing is that if the file being written previously existed in the Program Files directory, that'll be the one the program next reads rather than the one that Windows re-directed the writes to.

Hence the warning on http://aprsisce.wikidot.com/initial-startup

Note: Windows 7 and Windows Vista users: Do NOT put this directory under "Program Files" or any other Windows-Protected directory or the About-based automatic update will not work properly.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 5:10 PM, Steve Daniels wrote:

I think it’s UAC or DEP the aprsis instance is under my program files, the other instance is not and does not have the security icon.

I turned off firewall and also the file protection once using a program forgot what it’s called

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Colin XSD
Sent: 19 December 2012 22:05
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

Hi Lynn,

The 'admin privileges' was just an example, they seem to be there for various reasons. I think it just means there is something unusual about the program (no insult on APRSIS32 intended), I don't use the Windows Firewall (I use something else) so that might explain the difference.


73,
Colin
M0XSD.

On 19/12/2012 21:55, Lynn W Deffenbaugh (Mr) wrote:

APRSISCE/32 should not need administrator privileges for anything.  It is strictly a user-mode program.

Now, if they've updated something in the firewall, that might cause a flag.  As you would expect, APRSISCE/32 uses the network rather extensively.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 4:45 PM, Colin XSD wrote:

Hi Steve,

Has Windows done an update on your Computer recently?, it is just that I have noticed a few more of my Icons (on my Desktop) with the Shield added to the Icon since a recent update, I think it is just a general warning, like things that need admin privileges to run but I haven't got it on APRSIS32 (yet).


73,
Colin
M0XSD.

On 19/12/2012 21:25, Steve Daniels wrote:

 

OK thanks thought it might be APRSIS telling me something, it’s only just appeared so I need to find what to turn off in windows

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of James Ewen
Sent: 19 December 2012 19:58
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

That would be Windows keeping you safe. I don't know for sure what it is, but it is most likely your firewall blocking you, or maybe an antivirus program keeping you safe from that nasty program.

James 

On Wed, Dec 19, 2012 at 12:45 PM, Steve Daniels <steve@...> wrote:

[Attachment(s) from Steve Daniels included below]

Hopefully this will get through

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 18:14
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

Screenshot would be useful.  I'm not at all sure what you're seeing, but I don't recall doing anything like that.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 1:03 PM, Steve Daniels wrote:

Not seen this before, I have a yellow and blue colour circle on top of the APRSISCE/32 taskbar icon, does it have any significance?

Will screenshot it if required

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

Attachment(s) from Steve Daniels

1 of 1 Photo(s)



--
James
VE6SRV



Re: taskbar icon

Fred Hillhouse
 

"the aprsis instance is under my program files"

 

That explains it! Windows doesn't not have a certificate for it.

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Steve Daniels
Sent: Wednesday, December 19, 2012 17:10
To: aprsisce@...
Subject: RE: [aprsisce] taskbar icon

 

I think it’s UAC or DEP the aprsis instance is under my program files, the other instance is not and does not have the security icon.

I turned off firewall and also the file protection once using a program forgot what it’s called

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Colin XSD
Sent: 19 December 2012 22:05
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

Hi Lynn,

The 'admin privileges' was just an example, they seem to be there for various reasons. I think it just means there is something unusual about the program (no insult on APRSIS32 intended), I don't use the Windows Firewall (I use something else) so that might explain the difference.


73,
Colin
M0XSD.

On 19/12/2012 21:55, Lynn W Deffenbaugh (Mr) wrote:

APRSISCE/32 should not need administrator privileges for anything.  It is strictly a user-mode program.

Now, if they've updated something in the firewall, that might cause a flag.  As you would expect, APRSISCE/32 uses the network rather extensively.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 4:45 PM, Colin XSD wrote:

Hi Steve,

Has Windows done an update on your Computer recently?, it is just that I have noticed a few more of my Icons (on my Desktop) with the Shield added to the Icon since a recent update, I think it is just a general warning, like things that need admin privileges to run but I haven't got it on APRSIS32 (yet).


73,
Colin
M0XSD.

On 19/12/2012 21:25, Steve Daniels wrote:

 

OK thanks thought it might be APRSIS telling me something, it’s only just appeared so I need to find what to turn off in windows

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of James Ewen
Sent: 19 December 2012 19:58
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

That would be Windows keeping you safe. I don't know for sure what it is, but it is most likely your firewall blocking you, or maybe an antivirus program keeping you safe from that nasty program.

James 

On Wed, Dec 19, 2012 at 12:45 PM, Steve Daniels <steve@...> wrote:

[Attachment(s) from Steve Daniels included below]

Hopefully this will get through

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 18:14
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

Screenshot would be useful.  I'm not at all sure what you're seeing, but I don't recall doing anything like that.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 1:03 PM, Steve Daniels wrote:

Not seen this before, I have a yellow and blue colour circle on top of the APRSISCE/32 taskbar icon, does it have any significance?

Will screenshot it if required

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

Attachment(s) from Steve Daniels

1 of 1 Photo(s)



--
James
VE6SRV


Re: taskbar icon

Lynn Deffenbaugh
 

If you have the default directory under Program Files in Vista or Windows 7, then Windows will likely get upset about it, or require you to run it with elevated privileges.  APRSISCE/32 writes the logs and configuration (and tiles by default) to the default directory at runtime.  Newer versions of WIndows don't consider this "proper" behavior and actually redirect those writes to an alternate directory buried deep within your user profile.  The stupid thing is that if the file being written previously existed in the Program Files directory, that'll be the one the program next reads rather than the one that Windows re-directed the writes to.

Hence the warning on http://aprsisce.wikidot.com/initial-startup

Note: Windows 7 and Windows Vista users: Do NOT put this directory under "Program Files" or any other Windows-Protected directory or the About-based automatic update will not work properly.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 5:10 PM, Steve Daniels wrote:

I think it’s UAC or DEP the aprsis instance is under my program files, the other instance is not and does not have the security icon.

I turned off firewall and also the file protection once using a program forgot what it’s called

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Colin XSD
Sent: 19 December 2012 22:05
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

Hi Lynn,

The 'admin privileges' was just an example, they seem to be there for various reasons. I think it just means there is something unusual about the program (no insult on APRSIS32 intended), I don't use the Windows Firewall (I use something else) so that might explain the difference.


73,
Colin
M0XSD.

On 19/12/2012 21:55, Lynn W Deffenbaugh (Mr) wrote:

APRSISCE/32 should not need administrator privileges for anything.  It is strictly a user-mode program.

Now, if they've updated something in the firewall, that might cause a flag.  As you would expect, APRSISCE/32 uses the network rather extensively.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 4:45 PM, Colin XSD wrote:

Hi Steve,

Has Windows done an update on your Computer recently?, it is just that I have noticed a few more of my Icons (on my Desktop) with the Shield added to the Icon since a recent update, I think it is just a general warning, like things that need admin privileges to run but I haven't got it on APRSIS32 (yet).


73,
Colin
M0XSD.

On 19/12/2012 21:25, Steve Daniels wrote:

 

OK thanks thought it might be APRSIS telling me something, it’s only just appeared so I need to find what to turn off in windows

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of James Ewen
Sent: 19 December 2012 19:58
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

That would be Windows keeping you safe. I don't know for sure what it is, but it is most likely your firewall blocking you, or maybe an antivirus program keeping you safe from that nasty program.

 

James 

On Wed, Dec 19, 2012 at 12:45 PM, Steve Daniels <steve@...> wrote:

[Attachment(s) from Steve Daniels included below]

Hopefully this will get through

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 18:14
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

Screenshot would be useful.  I'm not at all sure what you're seeing, but I don't recall doing anything like that.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 1:03 PM, Steve Daniels wrote:

Not seen this before, I have a yellow and blue colour circle on top of the APRSISCE/32 taskbar icon, does it have any significance?

Will screenshot it if required

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 

 

 

Attachment(s) from Steve Daniels

1 of 1 Photo(s)



 

--
James
VE6SRV

 

 

 



Re: taskbar icon

sbd sbd
 

I think it’s UAC or DEP the aprsis instance is under my program files, the other instance is not and does not have the security icon.

I turned off firewall and also the file protection once using a program forgot what it’s called

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Colin XSD
Sent: 19 December 2012 22:05
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

Hi Lynn,

The 'admin privileges' was just an example, they seem to be there for various reasons. I think it just means there is something unusual about the program (no insult on APRSIS32 intended), I don't use the Windows Firewall (I use something else) so that might explain the difference.


73,
Colin
M0XSD.

On 19/12/2012 21:55, Lynn W Deffenbaugh (Mr) wrote:

APRSISCE/32 should not need administrator privileges for anything.  It is strictly a user-mode program.

Now, if they've updated something in the firewall, that might cause a flag.  As you would expect, APRSISCE/32 uses the network rather extensively.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 4:45 PM, Colin XSD wrote:

Hi Steve,

Has Windows done an update on your Computer recently?, it is just that I have noticed a few more of my Icons (on my Desktop) with the Shield added to the Icon since a recent update, I think it is just a general warning, like things that need admin privileges to run but I haven't got it on APRSIS32 (yet).


73,
Colin
M0XSD.

On 19/12/2012 21:25, Steve Daniels wrote:

 

OK thanks thought it might be APRSIS telling me something, it’s only just appeared so I need to find what to turn off in windows

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of James Ewen
Sent: 19 December 2012 19:58
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

That would be Windows keeping you safe. I don't know for sure what it is, but it is most likely your firewall blocking you, or maybe an antivirus program keeping you safe from that nasty program.

 

James 

On Wed, Dec 19, 2012 at 12:45 PM, Steve Daniels <steve@...> wrote:

[Attachment(s) from Steve Daniels included below]

Hopefully this will get through

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 18:14
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

Screenshot would be useful.  I'm not at all sure what you're seeing, but I don't recall doing anything like that.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 1:03 PM, Steve Daniels wrote:

Not seen this before, I have a yellow and blue colour circle on top of the APRSISCE/32 taskbar icon, does it have any significance?

Will screenshot it if required

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 

 

 

Attachment(s) from Steve Daniels

1 of 1 Photo(s)



 

--
James
VE6SRV

 

 

 


Re: taskbar icon

m0xsd
 

Steve,
Let us know what you find out, I'm still trying to learn 'Windows7'. I've tried making mine look & feel as much like XP as I can but there are a few things it won't let me mess with.

Colin
M0XSD.

On 19/12/2012 22:02, Steve Daniels wrote:

 

I did some updates, now trying to figure how to disable whatever it is

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 21:55
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

APRSISCE/32 should not need administrator privileges for anything.  It is strictly a user-mode program.

Now, if they've updated something in the firewall, that might cause a flag.  As you would expect, APRSISCE/32 uses the network rather extensively.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 4:45 PM, Colin XSD wrote:

Hi Steve,

Has Windows done an update on your Computer recently?, it is just that I have noticed a few more of my Icons (on my Desktop) with the Shield added to the Icon since a recent update, I think it is just a general warning, like things that need admin privileges to run but I haven't got it on APRSIS32 (yet).


73,
Colin
M0XSD.

On 19/12/2012 21:25, Steve Daniels wrote:

 

OK thanks thought it might be APRSIS telling me something, it’s only just appeared so I need to find what to turn off in windows

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of James Ewen
Sent: 19 December 2012 19:58
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

That would be Windows keeping you safe. I don't know for sure what it is, but it is most likely your firewall blocking you, or maybe an antivirus program keeping you safe from that nasty program.

 

James 

On Wed, Dec 19, 2012 at 12:45 PM, Steve Daniels <steve@...> wrote:

[Attachment(s) from Steve Daniels included below]

Hopefully this will get through

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 18:14
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

Screenshot would be useful.  I'm not at all sure what you're seeing, but I don't recall doing anything like that.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 1:03 PM, Steve Daniels wrote:

Not seen this before, I have a yellow and blue colour circle on top of the APRSISCE/32 taskbar icon, does it have any significance?

Will screenshot it if required

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 

 

 

Attachment(s) from Steve Daniels

1 of 1 Photo(s)



 

--
James
VE6SRV

 

 



Re: taskbar icon

m0xsd
 

Hi Lynn,

The 'admin privileges' was just an example, they seem to be there for various reasons. I think it just means there is something unusual about the program (no insult on APRSIS32 intended), I don't use the Windows Firewall (I use something else) so that might explain the difference.


73,
Colin
M0XSD.

On 19/12/2012 21:55, Lynn W Deffenbaugh (Mr) wrote:

APRSISCE/32 should not need administrator privileges for anything.  It is strictly a user-mode program.

Now, if they've updated something in the firewall, that might cause a flag.  As you would expect, APRSISCE/32 uses the network rather extensively.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 4:45 PM, Colin XSD wrote:
Hi Steve,

Has Windows done an update on your Computer recently?, it is just that I have noticed a few more of my Icons (on my Desktop) with the Shield added to the Icon since a recent update, I think it is just a general warning, like things that need admin privileges to run but I haven't got it on APRSIS32 (yet).


73,
Colin
M0XSD.

On 19/12/2012 21:25, Steve Daniels wrote:
 

OK thanks thought it might be APRSIS telling me something, it’s only just appeared so I need to find what to turn off in windows

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of James Ewen
Sent: 19 December 2012 19:58
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

That would be Windows keeping you safe. I don't know for sure what it is, but it is most likely your firewall blocking you, or maybe an antivirus program keeping you safe from that nasty program.

 

James 

On Wed, Dec 19, 2012 at 12:45 PM, Steve Daniels <steve@...> wrote:

[Attachment(s) from Steve Daniels included below]

Hopefully this will get through

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 


From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr)
Sent: 19 December 2012 18:14
To: aprsisce@...
Subject: Re: [aprsisce] taskbar icon

 

 

Screenshot would be useful.  I'm not at all sure what you're seeing, but I don't recall doing anything like that.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/19/2012 1:03 PM, Steve Daniels wrote:

Not seen this before, I have a yellow and blue colour circle on top of the APRSISCE/32 taskbar icon, does it have any significance?

Will screenshot it if required

 

Steve Daniels

Amateur Radio Callsign G6UIM

Torbay Freecycle  Owner

http://uk.groups.yahoo.com/group/torbay_freecycle

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

 

 

 

 

Attachment(s) from Steve Daniels

1 of 1 Photo(s)



 

--
James
VE6SRV




15201 - 15220 of 36589