Re: MFJ Dropping out of KISS mode...


Randy Love
 

unfortunately, no.

when we ran mfj tncs for the bbs that needed the mfj to be in kiss mode, we had to replace the eeprom with a kiss only one, that was aftermarket and i have no idea where to get them now.  besides, i think they cost about the same as a tt4 or otusb if you could find them now.

WF5X


On Mon, May 16, 2011 at 1:17 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
 

On 5/16/2011 12:29 PM, kc8sfq@... wrote:

I had what I needed to see right here. At 15:45:12 UTC, your TNC
rebooted itself and dropped out of KISS mode. It was working fine until
out of the blue it reported "RAM loaded with defaults...." and started
sending raw ASCII packets instead of KISS packets which causes APRSIS32
to complain about the missing C0 that's supposed to be at the beginning
of every KISS packet.

Is there a configuration setting to have the MFJ power up in KISS mode?
Or do you have any idea why it reset itself to start with?

Lynn (D) - KJ4ERJ - Software at the mercy of the hardware

> MFJ 1274:2011-05-16T15:44:59.308
> KISS:KC8LCP-10>WX,N8TJG-10*,MI2*:!!000000000202000127B502E1--------008702A300000000
> (48)
> MFJ 1274:2011-05-16T15:44:59.818
> KISS:KC8MGD>W8MAI-4,W8MAI-4*,N8TJG-10*,WIDE2*:=4202.20N/08630.28W_wide
> 2-2 {UIV32} (125)
> MFJ 1274:2011-05-16T15:45:12.717 KISS:Missing Leading C0[161]:|J<0D 0A
> 0D 0A 0D 0A>bbRAM loaded with defaults<07 0D 0A> |A<0D 0A 0D 0A 0D
> 0A>MFJ ENTERPRISES INC TNC-2<0D 0A>AX.25 Level 2 Version 2.0 + FAX +
> BLP 1.0<0D 0A>Release 1.2.8 03/01/91 - 32K RAM<0D 0A>Checksum
> MFJ 1274:2011-05-16T15:45:13.057 KISS:Missing Leading C0[9]:$55<0D 0A>cmd:
> MFJ 1274:2011-05-16T15:45:42.680 KISS:Missing Leading
> C0[145]:N9WWR>APU25N,N9LKH-1,W8MAI-4,N8TJG-10,WIDE3*,WIDE:@161544z4248.98N/08748.95W_012/007g012t045r000p000P000h69b10169Crestview
> wx station {UIV32}<0D 0A 0D 0A>
> MFJ 1274:2011-05-16T15:46:14.486 KISS:Missing Leading
> C0[88]:KD8CZP>W8MAI-4,W8MAI-4,WIDE1,NK8X-10*,WIDE2-1:=4206.05N/08624.26WoBerrien
> County EOC<0D 0A 0D 0A>


Join APRSISCE@groups.io to automatically receive all group messages.