Re: Filter Verification


Adam Mahnke <kc2ant@...>
 

hmm... so, I updated my filter to

a/42.6295/-076.7045/42.2555/-076.23833 -b/KD2EAT -s///D

but I'm still getting hits on stations with the "D" overlay


WinMain:2021-08-27T17:41:41.962 Considering:N2PKA-S Not Found
WinMain:2021-08-27T17:41:41.962 IStoRF:IS[APRS-IS](Hit(a/42.629500/-76.704500/42.255500/-76.238330)) [0]N2PKA-S>APDG01,TCPIP*,qAC,N2PKA-GS:;N2PKA  B *271741z4235.41ND07622.30WaRNG0001 440 Voice 441.00000MHz +0.0000MHz
WinMain:2021-08-27T17:41:41.962 IStoRF:Packet(N2PKA-S) W2CXM>APWW11,WIDE2-1:}N2PKA-S>APDG01,TCPIP,W2CXM*:;N2PKA  B *271741z4235.41ND07622.30WaRNG0001 440 Voice 441.00000MHz +0.0000MHz
WinMain:2021-08-27T17:41:51.805 Considering:N2PKA-B Not Found
WinMain:2021-08-27T17:41:51.805 IStoRF:IS[APRS-IS](Hit(a/42.629500/-76.704500/42.255500/-76.238330)) [0]N2PKA-B>APDG02,TCPIP*,qAC,N2PKA-BS:!4235.41ND07622.30W&RNG0001 440 Voice 441.00000MHz +0.0000MHz
WinMain:2021-08-27T17:41:51.805 IStoRF:Packet(N2PKA-B) W2CXM>APWW11,WIDE2-1:}N2PKA-B>APDG02,TCPIP,W2CXM*:!4235.41ND07622.30W&RNG0001 440 Voice 441.00000MHz +0.0000MHz
WinMain:2021-08-27T17:42:50.587 Considering:N2PYI-13(IS) I: 7
WinMain:2021-08-27T17:42:50.587 IStoRF:IS[APRS-IS](Hit(a/42.629500/-76.704500/42.255500/-76.238330)) [0]N2PYI-13>APT314,WIDE1-1,qAR,N2PYI-2:@141636z4229.40N/07623.63W_000/000g000t079r000p000P000h86b10191.DsVP
WinMain:2021-08-27T17:42:50.587 IStoRF:Packet(N2PYI-13) W2CXM>APWW11,WIDE2-1:}N2PYI-13>APT314,TCPIP,W2CXM*:@141636z4229.40N/07623.63W_000/000g000t079r000p000P000h86b10191.DsVP
WinMain:2021-08-27T17:43:00.603 Considering:N2LQI-S Not Found
WinMain:2021-08-27T17:43:00.603 IStoRF:IS[APRS-IS](Hit(a/42.629500/-76.704500/42.255500/-76.238330)) [0]N2LQI-S>APDG01,TCPIP*,qAC,N2LQI-GS:;N2LQI  B *271742z4236.32ND07622.36WaRNG0001/A=000010 440 Voice 445.96250MHz +0.0000MHz
WinMain:2021-08-27T17:43:00.603 IStoRF:Packet(N2LQI-S) W2CXM>APWW11,WIDE2-1:}N2LQI-S>APDG01,TCPIP,W2CXM*:;N2LQI  B *271742z4236.32ND07622.36WaRNG0001/A=000010 440 Voice 445.96250MHz +0.0000MHz


From: APRSISCE@groups.io <APRSISCE@groups.io> on behalf of Adam Mahnke <kc2ant@...>
Sent: Friday, August 27, 2021 1:34 PM
To: APRSISCE@groups.io <APRSISCE@groups.io>
Subject: Re: [APRSISCE] Filter Verification
 
Thanks Lynn,

so, if I want to filter out all of the -s///D symbols I have no way to send the D-Star Repeater with that symbol, I would need to recreate it as a repeater object and send it separately. 

Thank you, I thought I had it right, but it's been so long I wanted to double check with the more knowledgeable. 

73,
Adam
KC2ANT

From: APRSISCE@groups.io <APRSISCE@groups.io> on behalf of Lynn Deffenbaugh <kj4erj@...>
Sent: Friday, August 27, 2021 1:28 PM
To: APRSISCE@groups.io <APRSISCE@groups.io>
Subject: Re: [APRSISCE] Filter Verification
 

Yes, anything that says "hit" will go out.


And yes, the -s///D will trump (not allow) anything that was previously selected.


"-b/*-B" will not work because the * only works at the end of a station ID.  It is not a wildcard like used in a file system.


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


On 8/27/2021 1:16 PM, Adam Mahnke wrote:
I know that this is an old topic but I am looking for verification that my filter is set up correctly for IS to RF
Can someone also confirm in the Filter Test (ctrl+G) that when it says "hit" that it would be transmitted via RF?

Have a bunch of D-Star gateways in our area that don't need to go out onto RF because they are all short range. I do have one D-Star repeater that I want to go out however, and potentially a couple of high power hotspots, but not all of the little ones (like my house)

Proposed Filter:
a/42.6295/-076.7045/42.2555/-076.23833 b/AF2A* -b/KD2EAT -s///D

Goal: IS to RF Packets that
fall within the lat/long (proven, has been working great for a long time)
Adding a buddy filter to pass anything starting with AF2A (Including the D-Star Symbol because this is a repeater)
Don't transmit "KD2EAT" specifically
Don't transmit any symbol with a D overlay.

I feel like the b/AF2A* and the -s///D are going to interfere with each other.

Example calls that I want to NOT TX
N2MOF-B
N2MOF B
W2TXB-B
W2TXB B
N2FSD-B
N2FSD B
N2FSD-C
N2FSD C

But I DO want to TX 
AF2A-B

I'd considered doing it by "-b/*-B/ B/-C/ C" but I'm not sure which is the better option.

Thank you for taking a look at this,

Adam
KC2ANT

Join APRSISCE@groups.io to automatically receive all group messages.