APRSISCE@groups.io <APRSISCE@groups.io> On Behalf Of
Lynn Deffenbaugh via groups.io
Monday, July 26, 2021 3:14 AM
[APRSISCE] Initial Installation (was: GPS Enabled)
Please don't pirate conversations, but start your own with an applicable subject.
The symptom you are describing happens when you don't unzip the program into a newly created directory, but try to run it directly from a .ZIP viewer.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 7/25/2021 10:25 PM, AE7G wrote:
I have had this problem in the past but was always able to get through it. This time it doesn’t seem to be going away.
I am trying to install APRSIS32 in another computer.
I am getting the single bar across the screen that keeps blinking but doesn’t go anywhere. I am not able to open the initial screen.
What am I doing wrong?
Menu 500 was the key. GPS output has to be ON. That did it
I have been trying to get the GPS function to work for months.
-------- Original message --------
Date: 7/24/21 9:35 AM (GMT-06:00)
Subject: Re: [APRSISCE] GPS Enabled
I don't have either, but a friend has the "nonG" model.
Glacing through the manual for the G model, I see there are different indicators, depending on which GPS is in use:
GPS => external connected tothe 2.5 mm jack.
Menu 500 still offers GPS OUTPUT (GPS data output to PC) Default OFF
Menu 501 SENTENCES with the most common 4 as default
Then moving up to Menu 6xx
604 Another ON/OFF toggle, but for APRS.
I wonder if you have need to turn this OFF to allow raw GPS to the PC.
Some systems allow APRS as WAYPOINTS only and won't send raw GPS strings when requesting APRS output.
I can't say fro this Kenwood.
I didn't see anything that indicated you couldn't output the internal GPS data
Burt indicates that he is using a "G" model 710 with the *internal* GPS.
The reason I point this out is that I have a 710 and was considering upgrading to the 710G at one point, but I thought I read somewhere that with the "G" model you cannot have the internal GPS data pass through to the serial port, and that pass through only
works for an externally connected GPS unit on the "G" model.
Can anyone confirm whether this is true or not?