Christopher Rose <kb8uih88@...>
Thanks everyone for their input. Lynn, I am trying all the options to open a port that the kpc3 might like. So far no joy. Your program only has so many options. If you had an option for the kantronics tnc's I would like to see it. That would be the port label then. Randy, I don't know where to look for the TNC command set. I looked at the xml file and didn't see anything like that. Sorry. Robert, menu configure scroller has all checked. Menu view all is checked. Screenshot attached for other questions you had. Thanks again all ----------------------------------------- From: "Lynn Deffenbaugh" To: APRSISCE@groups.io Cc: Sent: Thursday June 3 2021 5:43:16PM Subject: Re: [APRSISCE] Scroller full of stations, no symbols on map
If this is a 710 packet port, why did you call your RF port
KPC3+?
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 6/3/2021 5:28 PM, Christopher Rose
wrote:
710 pkt port
-----------------------------------------
From: "Rob Giuliano via groups.io"
To: "APRSISCE@groups.io"
Cc:
Sent: Thursday June 3 2021 5:25:22PM
Subject: Re: [APRSISCE] Scroller full of stations, no symbols on
map
Must be in KISS mode. Stations have * so heard
on RF.
On Thursday, June 3, 2021, 5:09:39 PM EDT, Randy Love
<rlove31@...>
wrote:
What does the W8KPU station show? The call comes back to
Swartz Creek just west of Flint?
Seems you've still got a setting off somewhere.
Wait.. that's a KPC3+ tnc. I think you might not be in KISS
mode.
What are the <OpenCmds> from your xml file for that
port again?
Randy
WF5X
On Thu,
Jun 3, 2021, 5:04 PM Greg Depew <goatherder_4891@...> wrote:
Do they all have that <<UI>> in front of them? That could be
throwing things off.
KB3KBR Greg. Sent from my
Samsung Galaxy smartphone.
-------- Original message --------
From: Christopher Rose <kb8uih88@...>
Date: 6/3/21 17:01 (GMT-05:00)
To: "'APRSISCE@groups.io'"
<APRSISCE@groups.io>
Subject: Re: [APRSISCE] Scroller full of stations, no symbols
on map
They are in the ocean near West Africa -----------------------------------------
From: "Greg Depew"
To: "APRSISCE@groups.io"
Cc:
Sent: Thursday June 3 2021 4:56:54PM
Subject: Re: [APRSISCE] Scroller full of stations, no symbols on
map What do you mean by position data?
KB3KBR Greg. Sent from my
Samsung Galaxy smartphone.
-------- Original message --------
From: Christopher Rose <kb8uih88@...>
Date: 6/3/21 16:55 (GMT-05:00)
To: "'APRSISCE@groups.io'"
<APRSISCE@groups.io>
Subject: Re: [APRSISCE] Scroller full of stations, no symbols
on map
Just restarted to get some data. The stations showing regular
icons do have position data attached when I click on them. -----------------------------------------
From: "Greg Depew"
To: "APRSISCE@groups.io"
Cc:
Sent: Thursday June 3 2021 4:44:58PM
Subject: Re: [APRSISCE] Scroller full of stations, no symbols on
map Just guessing from the screenshot. But it looks like it hasn't
been running very long. Probably most of the red dots are sitting
at 0, 0 off of Africa. Maybe zoom out more and see if you can see
anyone else.
KB3KBR Greg. Sent from my
Samsung Galaxy smartphone.
-------- Original message --------
From: Christopher Rose <kb8uih88@...>
Date: 6/3/21 16:40 (GMT-05:00)
To: "'APRSISCE@groups.io'"
<APRSISCE@groups.io>
Subject: Re: [APRSISCE] Scroller full of stations, no symbols
on map
Rob, et al., Hopefully screenshot is attached. Let me know
what else you need
Chris -----------------------------------------
From: "Rob Giuliano via groups.io"
To: "APRSISCE@groups.io"
Cc:
Sent: Thursday June 3 2021 4:09:33PM
Subject: Re: [APRSISCE] Scroller full of stations, no symbols on
map
Just a though:
If you are still having issues you can rename
your APRSIS32.XML to APRSIS32.bak before starting the
program.
You will have to put in your callsign and
relocate yourself on the map, but APRSIS32 will create a fresh new
XML.
Clean start!
Afterward, you can use a file compare tool to see
what the changes are and maybe determine what caused the
issue.
On Thursday, June 3, 2021, 4:01:21 PM EDT, Christopher Rose
<kb8uih88@...>
wrote:
I am on RF, did not want an internet connection.
I zoomed out to see most of my state(MI). Some call signs I
recognized should have been in view.
I will look at the settings you have here and respond by
tomorrow.
Thank you
Chris -----------------------------------------
From: "Rob Giuliano via groups.io"
To: "APRSISCE@groups.io"
Cc:
Sent: Thursday June 3 2021 3:50:30PM
Subject: Re: [APRSISCE] Scroller full of stations, no symbols on
map
There are lots of us out here.
I get my messages directly through email and
typically respond the same way.
Looking through this topic and searching Groups.IO
for such things as your name (Rose or Christopher Rose) or 'no
symbols' did not get a thread that I could shed light on the
request.
From memory, I believe you said you had a scroller
full of stations, but no symbols on the map.
A few things:
1. Are the stations heard:
a) RF?
b) IS?
c) Both?
2. Is there anything just to the right of the "zoom
bar" next to the scroller?
What are the settings of Menu
>View?
3. What are the settings of Menu >Configure
>Scroller?
4. Did you scroll out to see if they were outside the map
boundaries?
5. Might they all have timed out?
Is the scroller, scrolling?
6. What is the value in Menu >Configure
>Screen >Symbol
Those are the items I can think of that may impact
the viewing of symbols on the map.
On Thursday, June 3, 2021, 3:20:35 PM EDT, Christopher Rose
<kb8uih88@...>
wrote:
Unfortunately the response to the author did not help or my
response back elicited no further response. Is any one else here
besides us? -----------------------------------------
From: "Randy Love"
To: APRSISCE@groups.io
Cc:
Sent: Thursday June 3 2021 2:24:51PM
Subject: Re: [APRSISCE] Scroller full of stations, no symbols on
map You received two different responses, one from the
author of the program.
Randy
WF5X
On Thu, Jun 3, 2021, 2:16 PM Christopher Rose
<kb8uih88@...>
wrote:
I asked a few days ago for help, is anyone watching the
list?
|
