Re: APRSISCE GPS


Burt N Sammis
 

Lets try this again.
I have everything working to my satisfaction except the Enables-GPS Enable.
When I activate Enables menu to show the info on the screen I get in the upper left corner a box with 2 large dashes and a smaller box
with 3 smaller dashes.  
In the lower right corner of the screen in a small box I get No Fix.  
Across the bottom of the screen there is no satellite info.
i am running a D710 with a GPS attached to the head.  As stated in a previous post I have attached a stand alone GPS with same results
What gives?

Another problem I have encountered I have activated Frequency Monitor.  When I deactivate it will not go away.  Raher annoying.  How do I get rid of it?
Burt
AF5AA       


From: APRSISCE@groups.io <APRSISCE@groups.io> on behalf of Min via groups.io <mins@...>
Sent: Saturday, May 1, 2021 2:05 PM
To: APRSISCE@groups.io <APRSISCE@groups.io>
Subject: Re: [APRSISCE] APRSISCE GPS
 

HI Burt

 

If your fixed station put the location in manually as any gps position location will suffer from GPS jitter and location will move by several yds/meters

Turn off GPS and fix the location on the screen.

 

Min G0JMS

 


From: APRSISCE@groups.io [mailto:APRSISCE@groups.io] On Behalf Of Burt N Sammis
Sent: Saturday, May 1, 2021 7:25 PM
To: APRSISCE@groups.io
Subject: [APRSISCE] APRSISCE GPS

 

i currently have APRSISCE/32 up and running on a computer.
In the Enables menu I have GPS Enabled.
On the screen displayed in the upper left hand corner is a square with two dashes and a smaller square with 3 smaller dashes.
I have a Kenwood TM-D710 running with GPS flashing showing it is receiving.
The D710 is connected to the computer with the furnished cable.
In the lower righthand corner of the screen shows no fix.
  
I have also connected a standalone GPS to the computer with the same results.
What am I missing?
Burt
AF5AA   

Join APRSISCE@groups.io to automatically receive all group messages.