Re: [EXT] Re: [APRSISCE] Configure APRSIS32 for Kenwood TM-D710GA as Mobile
Gary 2200E N6GLS
toggle quoted messageShow quoted text
Yes, I use my D710G all the time for APRSIS32 and Winlink. Keep my cable in all the time and just bring my laptop and plug in.
73 de Gary N6GLS
Sent from my T-Mobile 4G LTE Device
-------- Original message --------
From: Kevin Reeve <kevin.reeve@...>
Date: 6/21/20 4:13 PM (GMT-08:00)
Subject: Re: [EXT] Re: [APRSISCE] Configure APRSIS32 for Kenwood TM-D710GA as Mobile
From: <APRSISCE@groups.io> on behalf of "Charles Jessee via groups.io" <cbjesseeNH@...>
I’m just looking to switch from a Yaesu FTM-400 to a Kenwood TM-D7100GA and looking at the Wiki: “ How can you configure APRSISCE/32 to run in APRS mode without
usurping control from the Kenwood TM-D710 radio? Well, you really can't if you expect APRSISCE/32 to ever transmit because on the first transmission, MYCALL will be set which changes the D710's identity until it's next TNC reset. However, if you avoid messaging
from APRSISCE/32 (or even receiving a message to which an ack must be sent), the following might work for you.“
This seems to suggest that if one gives up major functionality APRSIS32 can work with a TM-710GA. What’s the upside for accepting this downside? If sure I’m missing
CAUTION: This email originated from outside of USU. If this appears to be a USU employee, beware of impersonators. Do not click links, reply, download images, or open attachments unless you verify the sender’s identity and know the content is safe.