toggle quoted messageShow quoted text
On 5/25/2020 1:16 AM, Greg D wrote:
What Fred is talking about is the satellite pass prediction
service that Lynn has running. Send an APRS message by any method
(Internet is probably best) to the satellite name, and you'll get
a reply message with information showing the next pass. So, just
send a message to "ISS". The message text can be anything (it's
not used). Be sure to beacon where you are first.
Gervais Fillion wrote:
i am not there yet as
i want to know when
she approach my qth so i will listen at her tx
frequency,,145.800 if i recalled years ago and see if
something has changed.
it may gave me a go to
programm a radio and,,,called them!!!! who knows.
And, if you send a message to ISS, you
will receive the time of the next pass over your
o/ISS*/PSAT* will get you the APRS satellite objects
that I inject into the APRS-IS. See also:
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows
Mobile and Win32
4:21 PM, Gervais Fillion wrote:
what line did you add in your
filter to see the Ariss passing by your,around
i would like to see her if she
pass over eastern canada too.
73 from the other end of canada
Thank You. I've
switched the Path to ARISS as mentioned
I my D72, I use a
path of ARISS. You should use the
same path. You don’t need any other
On Behalf Of Don Poaps
Sent: Saturday, May 23, 2020
Subject: [APRSISCE] APRSIS
settings for ISS
of us in the Vancouver BC area
have been pushing APRS. Lately
ISS is been coming up. Is there
any setting in Path or anywhere
else. I'm using a Mobilink TNC3
with a cheap HT normally on
144.390. I've moved to 145.850.
has been checked for viruses
by Avast antivirus software.