Re: How to stop APRS-IS port from sending out beacons


Glenn O'Connor
 

I just unchecked my APRSIS beacon box. It seems I operate much as you do.

 

I don’t currently see your symbol however on either aprs.fi or aprsdirect.com.

Examine my station-KF0ED.

 

 

73,

Glenn-KF0ED

 

 

 

From: APRSISCE@groups.io <APRSISCE@groups.io> On Behalf Of Komkit Listisard via groups.io
Sent: Sunday, May 24, 2020 5:47 AM
To: APRSISCE@groups.io
Subject: [APRSISCE] How to stop APRS-IS port from sending out beacons

 

Hi folks,
I have both RF and IS ports enabled.  I unchecked "Beacon" under APRS-IS port configuration. 

Most of the time when I checked the APRS.FI I noticed    "W3KIT>APWW11 via TCPIP*,qAC,T2MEXICO"   or something similar instead of RF digipeating path.

I was looking at the Soundmodem screen,  I did see the digipeater acknowledged my "RF beacon"  and did not collided with other packets,  but APRS.FI somehow is showing I am beaconing via TCPIP instead of RF.

Been reading,  I understand if I unchecked "Beacon" under APRS-IS port configuration, APRSIS32 would not reporting my position to the server over the TCPIP.

Is there another settings that I may have missed? Or some sort of a filter that I could use.

Thanks,  Kit W3KIT

Join APRSISCE@groups.io to automatically receive all group messages.