Re: IGate and Satellite's

Rob Giuliano

APRSIS32 has no built in rig control.  I am not sure how much "control" the D710 does through the computer.  I think it is more for programming the memeory, and voice option in an APRS message.

You will need something like Ham Radio Deluxe or other radio application that includes satellite tracking.
I was able to download Orbitron 3.71 and MyDDE, connect it to HDSDR with <F7> Options then "DDE to HDSDR".
The frequency in HDSDR seemed to be tracking.  Just did this as a test, so can't speak to how well it works.
  Might be able to try this later in the week.

This could work with other applications.

Robert Giuliano

On Monday, November 18, 2019, 7:15:20 AM EST, KD7YZ Bob <kd7yz@...> wrote:

On 11/15/2019 23:09, Rob Giuliano via Groups.Io wrote:

> AMSAT UK site has a nice spreadsheet
.....  Using it to set "*" for active in column H,
> then looking for 1200 AFSK, I count 20 with downlink frequencies, and a
> few more that just say APRS.  That sounds like a lot.

Thanks on that find!

which makes me ask if it's possible to auto switch freq's by APRSIS/32 ?
Or by some other program compatible with all this?

Seems a dozen or more are on various 437mHz QRG's.

I have PSTRotator which can auto-switch to the next current in a list I
make. I am doubtful it can change the D710GA freq ... however, I will
ask over on their "board".

> You don't say what SDR-console is connected to, but it sounds like a
> receive only device sending decoded sata to APRSIS32.
> I have three RTL "Dongles" which I sometime use to RX EME, go figure. I
also have a Funcube Dongle for same I listen to APRS or AX,25 too
... the output into SDR-Console into a Virtual Audio Cable ...into a
"soundcard" input of AGWPE and, I guess, TELNET to APRSIS/32 .

So, my first goal would be to program all those "new" APRS qand AX.25
birds in then auto-track and see if they are really there for me to
hear/decode ... then try and work someone off them

thus the need to have some program pick the bird and switch me wee
D710GA to said QRG .... as I doubt seriously I am about to sit hear 24/7
looking for them , hi hi

----------------Trace IGate-------------------------
WinMain:2019-11-18T02:06:27.369 Msg2RF:Message(AI9IN) HeardOnRF, Local
(1 vs 2), 6 Hops To(AI9IN) Payload(:AI9IN    :Heard you via ISS in
Montpelier, VA FM17es)

WinMain:2019-11-18T02:06:27.369 Msg2RF:Message(AI9IN)
:Heard you via ISS in Montpelier, VA FM17es

WinMain:2019-11-18T02:06:27.370 Pos2RF:Need FreePosition(K4KDR-6) For(AI9IN)

WinMain:2019-11-18T02:06:56.564 Msg2RF:Message(KL7JKC-6) HeardOnRF,
Local (1 vs 2), 5 Hops To(KL7JKC-6) Payload(:KL7JKC-6 :Your 599 in
Williamsfield, Illinois! 73's (KC9YTT Actual))

WinMain:2019-11-18T02:06:56.564 Msg2RF:Message(KL7JKC-6)
KD7YZ-15>APWW10,WIDE2-2:}KC9YTT>CQ,TCPIP,KD7YZ-15*::KL7JKC-6 :Your 599
in Williamsfield, Illinois! 73's (KC9YTT Actual)

WinMain:2019-11-18T02:06:56.564 Pos2RF:Need FreePosition(KC9YTT)

WinMain:2019-11-18T04:38:59.453 RFtoIS:[KWD710(APRS)]IGated
N4TNA-9>SX3P3U,qAR,KD7YZ-15:`nFoq#v/`"5O}Monitoring the KG4DVE Repeater_%

WinMain:2019-11-18T11:52:09.753 RFtoIS:[AGWPE-TELNET ]IGated
KD7YZ-15>SXRY4Q,WIDE2-2,qAR,KD7YZ-15:'oY"l -/]TEST D710GA & APRSIS32=


Am not sure why I iGate myself as I thought ZI have the set to NOT Gate ME

some others there  ... confuse me, it seems a few guys can TCP to me
then IS-RF to the satellites? Fine by me but it's a new one on me.

I said .. I am learning, didn't I ? hi hi


Join to automatically receive all group messages.