Lynn,

FYI, there's:

 - IGate
 - IGate(Filter)
 - Igate(NOT)
 - iGateEnabled

Greg  KO6TH


Lynn Deffenbaugh wrote:
> Look for a Trace Log called Port(<YourPortName>) and enable it.  You
> should also see these in the IGate Trace Log if the correct options
> are chosen on the port configuration dialog to gate the received
> packets.  At least I think the name is IGate!  I don't have one
> running at the moment having switched my IGate over to APRSISMO.
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>
> On 11/13/2019 8:32 AM, KD7YZ Bob wrote:
>> I do not see a way in APRSIS32 to read or see or log data coming in
>> from the SignaLink Soundcard which is plugged into the D710GA data port.
>>
>> However, AGWPE can see it as here is a recent decode:
>>
>> -------------------------------------------------------
>>  3:Fm BIRDMY To APTT4 Via WIDE1-1 <UI pid=F0 Len=50 >[03:15:55]
>> HELLO! THIS IS APRS-DIGIPEATER OF UiTMSAT-1 CUBESA
>>
>>  3:Fm RS0ISS To CQ <UI pid=F0 Len=36 >[06:02:54]
>> >ARISS - International Space Station
>>
>> ----------------------------------------------------------------
>>
>> I had hoped to iGate these back to wherever the Sat owners might read
>> and see their respective Birds were seen over Kentucky.
>>
>> I have Packets Log turned on. But they are all APRS-IS , typically :
>>
>> 2019-11-13T13:06:26.952 IS[APRS-IS]
>> KG4DVE-1>APMI06,TCPIP*,qAS,KG4DVE:;146.94-TR*111111z3823.97N/08239.77Wr146.940MHz
>> T107 R25m KG4DVE/R
>>
>>
>> The AGWPE Setup is for
>>
>> Microphone (23- USB Audio CODEC )
>> Speakers (23- USB Audio CODEC )
>>
>> which IS the SignaLink plugged into the Data Port.
>>
>> I had CH-B/Band-B tuned to 145.825 and the decodes came from that.
>> Thus I see the D710GA IS decoding stuff off the data port. Or ?.
>>
>> How would I gather those decodes and iGate them from APRSIS32?
>>
>> Thank you.
>>
>> --
>> 73
>> Bob KD7YZ
>> AMSAT LM #901
>>
>>
>>
>>
>
>
>