Re: No Tx with APRSIS & FT7800


James Ewen
 

On Tue, Jan 28, 2014 at 6:11 PM, <eckerpw@...> wrote:

James - the T2 is in KISS mode; here is the error log:
WinMain:2014-01-28T20:51:33.895 Starting Port(FT7800)
Port(FT7800):2014-01-28T20:51:33.895 CpReader Running on COM4:9600,N,8,1 (1
OpenCmds, 1 CloseCmds)

Port(FT7800):2014-01-28T20:51:33.895 Opening COM4:9600,N,8,1
Port(FT7800):2014-01-28T20:51:33.895 Opening COM4 with 4 Args
Port(FT7800):2014-01-28T20:51:33.896 Opened COM4:9600,N,8,1, Flushing 0 in
TransmitQueue, Sending 1 OpenCmds
Port(FT7800):2014-01-28T21:55:14.739 Status -1 Error 1 At 491 in
c:&#92;compass&#92;code&#92;aprs&#92;aprsisce&#92;cprtns.c
Port(FT7800):2014-01-28T21:55:14.740 Status -1 Error 0 At 529 in
c:&#92;compass&#92;code&#92;aprs&#92;aprsisce&#92;cprtns.c
Port(FT7800):2014-01-28T21:55:14.740 Error Reading Port,
CpReadBytesWithTimeout FAILED!
Port(FT7800):2014-01-28T21:55:14.740 Error Reading Port, PortReadCommPort
FAILED!
Port(FT7800):2014-01-28T21:55:14.740 Terminating after 152703 msec vs 0
Quiet
Port(FT7800):2014-01-28T21:55:14.740 Closing COM4:9600,N,8,1
Port(FT7800):2014-01-28T21:55:14.782 Restarting Reader...
Port(FT7800):2014-01-28T21:55:14.782 CpReader Running on COM4:9600,N,8,1 (1
OpenCmds, 1 CloseCmds)
Port(FT7800):2014-01-28T21:55:14.782 Opening COM4:9600,N,8,1
Port(FT7800):2014-01-28T21:55:14.782 Opening COM4 with 4 Args
Port(FT7800):2014-01-28T21:55:14.783 Opened COM4:9600,N,8,1, Flushing 0 in
TransmitQueue, Sending 1 OpenCmds

I can provide whatever else might be helpful
Where are the lines that have "a bunch of entries starting with KISS:
not long enough and MISSING 0"

The above error is looking like you have something attached to com4
already. APRSISCE/32 is not able to open the com port because it is
already opened by another program.

Lynn will know exactly what the errors thrown mean, but it sure looks
like something else already has the com port. Close whatever else you
have running attached to the com port and try again.

--
James
VE6SRV

Join APRSISCE@groups.io to automatically receive all group messages.