Re: Beaconing the ISS


Adam Mahnke <kc2ant@...>
 

IIRC you use the satellite dish icon as well, got that all up and running?

Adam
KC2ANT

-----Original Message-----

From: w7boz
Sent: 31 Oct 2012 11:32:13 GMT
To: aprsisce@...
Subject: [aprsisce] Re: Beaconing the ISS

 

Same here. I run a different Aprsisce for ISS and other Satellitte coms. I actually prefer to do it this way.

Kevin
W7BOZ

--- In aprsisce@..., Adam Mahnke wrote:
>
> That's what I did for my D710 for packet mode vs APRS mode, they share the same map directories and NWS files, but the .exe and .xml files are separate.
>
> Adam
> KC2ANT
>
> -----Original Message-----
>
> From: Lynn W Deffenbaugh (Mr)
> Sent: 30 Oct 2012 12:04:04 GMT
> To: aprsisce@...
> Subject: Re: [aprsisce] Beaconing the ISS
>
> Profile switching is not near the top of my list.
>
> If you want substantially different behaviors out of APRSISCE/32 (to
> work the ISS, for instance), then make a new directory, copy the .EXE
> (or set up a shortcut), and configure the new instance. It's not that
> hard, especially in comparison to the complexity (and confusion) that I
> foresee in the profile switching (like what settings are shared and
> which are changed).
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>
> On 10/30/2012 12:41 AM, Greg Dolkas wrote:
> >
> >
> > Hi Lynn,
> >
> > This was a good reminder... I occasionally flip my radio to the ISS
> > frequency, but without changing all the bazillion options to properly
> > operate through Satellites. I believe you have a profile switch of
> > sorts on your to-do list, right? Before I invest time and space (no
> > pun intended) in cloning my APRSIS/32 instance (per the instructions
> > on the Wiki), how close to the top of your queue is the enhancement
> > for a Terrestrial / Space (or whatever profiles) configuration option?
> >
> > Thanks,
> >
> > Greg KO6TH
> >
> >
> > On Mon, Oct 29, 2012 at 11:53 AM, Steve Daniels
> > > > > wrote:
> >
> > You could start by following this WIKI entry it probably answers
> > most of your questions, I will edit out the FAST references as
> > those sats no longer function that I am aware of
> >
> > http://aprsisce.wikidot.com/doc:satelliteops
> >
> > Steve Daniels
> >
> > G6UIM
> >
> > TorbayFreecycle Moderator
> > http://http://uk.groups.yahoo.com/group/torbay_freecycle
> > <http://http:/uk.groups.yahoo.com/group/torbay_freecycle>
> >
> > APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com
> >
> > ----------------------------------------------------------
> >
> > *From:*aprsisce@... aprsisce@...>
> > [mailto:aprsisce@...
> > aprsisce@...>] *On Behalf Of *kc2nyu
> > *Sent:* 29 October 2012 18:48
> > *To:* aprsisce@... aprsisce@...>
> > *Subject:* [aprsisce] Beaconing the ISS
> >
> > Got interested in ISS the past few days and decided to see if I
> > could "Beacon" the ISS or have my signal received and digipeated.
> > I am using a roof top dual band vertical at about 35ft, an FT 7800
> > dual band radio, Argent T2 and APRSIS Dev ver last updated
> > 10/6/2012. A few minutes before the start of ISS pass at my QTH,
> > tuned radio to the ISS packet freq and 145.825. Then got about 8
> > min of packet bursts and received a number of stations from the
> > ISS Digi which were Igated at my station. Scanning the messages
> > log, it appears my msg was ACk, but not sure.
> >
> > My question is - can I and if so, what steps do I take within
> > APRSIS to beacon or send my call, position etc to the ISS??
> >
> > Tnx and 73 Paul kc2nyu
> >
> >
> >
> >
> >
>

Join APRSISCE@groups.io to automatically receive all group messages.