Re: Beaconing the ISS


kc2nyu <eckerpw@...>
 

Lynn and all that responded - thanks- will give the below advice and ago and see how I do.

73 Paul kc2nyu

--- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:

Profile switching is not near the top of my list.

If you want substantially different behaviors out of APRSISCE/32 (to
work the ISS, for instance), then make a new directory, copy the .EXE
(or set up a shortcut), and configure the new instance. It's not that
hard, especially in comparison to the complexity (and confusion) that I
foresee in the profile switching (like what settings are shared and
which are changed).

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/30/2012 12:41 AM, Greg Dolkas wrote:


Hi Lynn,

This was a good reminder... I occasionally flip my radio to the ISS
frequency, but without changing all the bazillion options to properly
operate through Satellites. I believe you have a profile switch of
sorts on your to-do list, right? Before I invest time and space (no
pun intended) in cloning my APRSIS/32 instance (per the instructions
on the Wiki), how close to the top of your queue is the enhancement
for a Terrestrial / Space (or whatever profiles) configuration option?

Thanks,

Greg KO6TH


On Mon, Oct 29, 2012 at 11:53 AM, Steve Daniels
<steve@...
<mailto:steve@...>> wrote:

You could start by following this WIKI entry it probably answers
most of your questions, I will edit out the FAST references as
those sats no longer function that I am aware of

http://aprsisce.wikidot.com/doc:satelliteops

Steve Daniels

G6UIM

TorbayFreecycle Moderator
http://http://uk.groups.yahoo.com/group/torbay_freecycle
<http://http:/uk.groups.yahoo.com/group/torbay_freecycle>

APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

------------------------------------------------------------------------

*From:*aprsisce@yahoogroups.com <mailto:aprsisce@yahoogroups.com>
[mailto:aprsisce@yahoogroups.com
<mailto:aprsisce@yahoogroups.com>] *On Behalf Of *kc2nyu
*Sent:* 29 October 2012 18:48
*To:* aprsisce@yahoogroups.com <mailto:aprsisce@yahoogroups.com>
*Subject:* [aprsisce] Beaconing the ISS

Got interested in ISS the past few days and decided to see if I
could "Beacon" the ISS or have my signal received and digipeated.
I am using a roof top dual band vertical at about 35ft, an FT 7800
dual band radio, Argent T2 and APRSIS Dev ver last updated
10/6/2012. A few minutes before the start of ISS pass at my QTH,
tuned radio to the ISS packet freq and 145.825. Then got about 8
min of packet bursts and received a number of stations from the
ISS Digi which were Igated at my station. Scanning the messages
log, it appears my msg was ACk, but not sure.

My question is - can I and if so, what steps do I take within
APRSIS to beacon or send my call, position etc to the ISS??

Tnx and 73 Paul kc2nyu




Join APRSISCE@groups.io to automatically receive all group messages.