Re: Help with setup for Open Tracker 2


Bob Burns W9RXR <w9rxr_@...>
 

At 10:39 PM 6/26/2011, kc8sfq@... wrote:

OK, I tried that, should I remove the other <OpenCmd>~!!0</OpenCmd> lines?
I think so, he said cautiously.

I replaced all of the open and close commands with the ones that I listed in my previous email. The commands Lynn suggests probably work as long as the T2 is already in KISS mode at the correct baud rate. The commands I suggested assume that the T2 is in AUTO mode at 9600 baud. I didn't experiment with putting the T2 in AUTO mode with auto baud enabled.

Bob...

Join APRSISCE@groups.io to automatically receive all group messages.